RGWOOD Pen Turning Mandrel (Shopsmith)

RGWOOD Pen Turning Mandrel (Shopsmith)

Pen Turning Mandrels are used specifically for turning pens on your lathe and are essential to the pen turning process. This Pen Mandrel is for use on Shopsmith type machines, and features a precision-machined steel shaft that is held in your lathe for accurate pen turning.

• Pen mandrel with 5/8″ mount
• For Shopsmith type machines
• Includes 4 bushings for standard slim line pens, accepts standard 7mm bushings for other profiles

This RGWOOD Pen Turning Mandrel (Shopsmith) can also be bought as a set with a Deluxe Barrel Trimmer Kit.

To utilize a pen turning mandrel on a Shopsmith machine, start by securing the mandrel in the lathe chuck. Ensure it’s tightened securely to prevent wobbling during operation. Next, mount the pen blank onto the mandrel, making sure it’s centered and aligned properly. Adjust the tailstock to support the opposite end of the mandrel, providing stability while turning. Turn on the lathe at a moderate speed suitable for the material you’re working with, and begin shaping the pen blank with your preferred turning tools. Take light, gradual passes to avoid chipping or splintering the wood. Continuously check the progress and adjust your technique as needed. Once satisfied with the shape, sand the pen blank to a smooth finish, gradually increasing the grit for a polished surface. Finally, apply your desired finish to complete the pen turning process.