RGWOOD 3 Piece Wood Lathe Faceplate Bundle (3/4″ x 16tpi)

RGWOOD 3 Piece Wood Lathe Faceplate Bundle (3/4″ x 16tpi)

This 3 Piece Wood Lathe Faceplate Bundle for 3/4″ x 16tpi spindles includes/features:

• One 2″, one 3″, and one 4″ faceplate to fit 3/4” x 16tpi spindles
• Multiple fastening options, with 4 holes on the 2″ and 3″ faceplates and 8 holes on the 4″ faceplate.
• Flats on the 3″ and 4″ faceplate backs are compatable with this spanner wrench
• Faceplates are heavy duty steel

If you’re new to wood turning, here are some useful tips to help you get set up with your new faceplates:

1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread.

2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it’s tightly secured.

3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square.

4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold.

5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy.

6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask.

7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws.

8. Maintenance: Clean and store the faceplate in a dry place after use.

Following these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects.