Cyanoacrylate Glues

We have an extensive selection of Cyanoacrylate Glues including:

• Maxi-Cure (Extra Thick)
• Insta-Cure+ (Medium
• Insta-Cure (Super Thin)
• Insta-Set CA Glue Accelerator

MAXI-CURE CA Glue (Extra Thick)

The Maxi-Cure CA Glue (Extra Thick) is the ultimate solution for bonding a wide range of plastics, including GE’s Lexan. It is indispensable for plastic model assembly as Maxi-cure ensures a flawless integration with plastic surfaces.

Additionally, Maxi-cure glue is set apart from conventional glue due to its compatibility with the INSTA-SET accelerator. This extra thick Cyanoacrylate glue excels in filling voids and facilitating modifications with ease.

Furthermore, Maxi-cure is crafted to deliver precision, and can be shaped using a knife or razor blade, or it can be seamlessly finished through sanding. Maxi-Cure™ blends durability, adaptability, and affordability, making it the preferred choice across various applications.

INSTA-CURE + CA Glue (Medium)

Insta-Cure+ CA Glue (Medium) is a higher viscosity Cyanoacrylate glue for loose fitting joints. The adhesive bridges the gaps. Normally, you would first apply the thicker CA one surface. Then, you would hold the parts tightly together for about 5 to 10 seconds. However, for large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used.

Pro tips:

• To prevent premature curing, don’t spread the glue into a thin film.
• Lay down a serpentine bead with about 1″ separations on one surface, then assemble the parts, letting the pressure spread the CA out.

INSTA-CURE CA Glue (Super Thin)

Insta-Cure CA Glue (Super Thin) has a water-thin viscosity! With its thin viscosity, it wicks deep into joints by capillary action and cures in a matter of 1-3 seconds. Make sure the surfaces being bonded are tight fitting. Then, hold the items together while you apply the CA around the edges of the seam. Be aware: as the super thin CAs cures, they give off a vapor that can irritate the nose and eyes. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

About Bob Smith Industries:

Bob smith industries has been producing adhesives for over 40 years!

Our primary focus has been to supply the hobby industry with Cyanoacrylates (Super Glue, CA) and Epoxies, but a funny thing happened along the way. Not long ago, commercial or hobby grade adhesives were considered to be a step or two below the quality of name brand industrial glues. But that has changed. When asked for the best source for premium grade Cyanoacrylates, many craftsmen and industrial users now suggest “Go to your local hobby shop.” BSI adhesives have earned an international reputation of being as good as, if not better than, industrial grade, at a fraction of the cost.

By starting with only the best raw materials and manufacturing processes, BSI produces the highest performing adhesives, with top-notch technical support. By selling direct to retailers, BSI adds the critical factor of having dealers stocking fresh products. Additionally, BSI’s adhesives never sit in a warehouse under uncontrolled conditions. This results in an unmatched shelf life and consistent performance, which a growing number of hardware retailers are taking advantage of.