ONEWAY Easycore Base Set (16″, 18″, or 20″)

The ONEWAY Easycore Base Set is one of 3 components for the Easycore cutting system.

Coring doesn’t have to be a scary, unnerving experience anymore. Even novice turners with a bit of instruction (instructional video is supplied with the system), can easily remove several bowls from one blank.

Get the most from your expensive burl or bowl blank, while not feeling exhausted at the end of the process. You will have lots of energy left to core more bowls or turn that piece you’ve been waiting to get your hands on for the last month.

WHAT DO I NEED?

The Easy-Core Coring System is comprised of Three main parts:

• Base Set, which holds the cutting blade and is specific to the swing of your lathe
  
• Knife Sets, which do the cutting and determine the size of cores you can remove
  
• Bed Clamp Block, which holds the whole assembly to your lathe bed

Base Set

The Base Set needed is determined by the swing of the lathe. The swing is the distance from the middle of the spindle to the bed multiplied by two. For now we are carrying 3 options, one for a 16″ swing, an 18″ swing, and for a 20″ swing. please select in the dropdown box which size you need

A Clamp Block (sold separately) will also vary from lathe to lathe. To determine the size of the Clamp Block needed, measure the distance between the bedways. This GAP determines the Clamp Block required.

Knife Sets

The Knife Sets determine what size bowl blanks can be cored. There are four knife sets available for a complete system. These Knife Sets can be purchased separately.

The Knives are made from quality materials to ensure they hold up to the task at hand. The support fingers for knife sets #1 & #2 are constructed using 60,000 lb tensile carbon steel, whereas the support fingers for knife sets #3 & #4 are made from 100,000 lb chrome nickel steel.

Each Knife Set includes a knife, support, and cutter.