Martel Diamond Burr

The Martel Diamond Burr is a 1/2″ elliptical cone shaped 150 grit diamond burr with 1/4″ shank, for maintaining the perfect inside bevel shape in your Martel Hook Tool.

The Martel Hook Tool features a concave shaped bevel on its inside edge, which offers a very sharp cutting edge and allows the user to use a small hone or file to sharpen the cutting edge without the need to take out much material. However, repeated use of a flat sharpening tool with eventually turn this concave bevel into a flat or convex bevel, making sharpening more difficult and less effective. This is where the elliptical burr comes in, allowing easy maintenance and restoration of the bevel shape. Paired with the Martel Diamond hone you can keep your hook tool cutting smooth for a lifetime.

This burr can be mounted in a drill press for easy use, or even a hand drill if that’s what you have available. Use a low speed and take your time to ensure you achieve the proper inside profile on your hook tool.

• Check Out the Martel Hook Tool And Accessories

  • Large Martel Hook Tool
  • Medium Martel Hook Tool
  • Small Martel Hook Tool

  the products below will help you use and maintain your MHT

  • Hook Tool Shanks
  • Adapting Sleeves
  • Diamond hone
  • Fine Felt Hone
  • Diamond Burr
  • Martel Handles
  • End Grain Turning DVD

  Complete Hook Tool kits

  Featuring all you need in one convenient bundle

  • Martel MHT Kit with dvd (Small)
  • Martel MHT Kit with dvd (Medium)