RGWOOD
RGWOOD Pen Turning Mandrel (Shopsmith)
RGWOOD Pen Turning Mandrel (Shopsmith)
Couldn't load pickup availability
RGWOOD Pen Turning Mandrel (Shopsmith)
Are you ready to turn some custom pens? Our RGWOOD Pen Turning Mandrel (Shopsmith) features a precision-machined steel shaft that is spun by your lathe for pen turning. Pen mandrels hold the pen blank on the woodlathe and are essential to the pen turning process. If you’re looking to turn your first pen, be sure to read below for some instructions on how to get set up.
IMPORTANT: This mandrel is exclusively for shopsmith lathes with 5/8” plain bore. If your lathe is #1MT, shop HERE instead. if your lathe is #2MT, shop HERE.
Beginner friendly and easy to set up
Once your pen blank is drilled, glued, and ready to be turned, insert the mandrel directly into the headstock of your lathe. Then, slide your blank onto the mandrel with the bushings. Tighten the brass ring snugly against the bushings, and secure your tail stock into place. Now you’re ready to turn!
Includes 4 bushings for standard slim line pens
4 bushings for slim line pen style projects are included, but this mandrel also accepts standard 7mm bushings for other pen shapes or profiles.
Here are some tips for pen turning that you might find useful:
Preparation:
Begin by gathering all the equipment and supplies needed. In addition to a lathe, you’ll need:
- a pen mandrel kit such as this one
- a barrel trimmer (if you need to pick up a pen mandrel and barrel trimmer, you might want to buy our deluxe pen mandrel kit instead of this one!)
- a drill press or a drill chuck for your lathe’s tail stock
- a shopsmith-compatible live center to support the pen mandrel
- a pen kit with tubes, hardware, etc.
- a wood blank
- a drill bit - 7mm works for most pen kits and is included with all pen mandrels by RGWOOD.
- CA glue or super glue
- sandpaper
- finishing materials, such as polish or wax
- safety equipment (eye protection and dust mask recommended).
Share
