RGWOOD
RGWOOD 2MT 3/4" Multi Point Tailstock Live Center
RGWOOD 2MT 3/4" Multi Point Tailstock Live Center
Couldn't load pickup availability
RGWOOD 2MT 3/4" Multi Point Tailstock Live Center
This is an RGWOOD 2MT 3/4" Multi Point Tailstock Live Center. This live center is easy to install and will fit right into a 2MT tailstock spindle. Featuring a multipoint surface and spring loaded pin, this live center offers strong workholding, and won't split your wood. This shape also provides a larger contact area with the workpiece, enhancing grip while accommodating slight variations in size and shape.
What is a live centre?
A tailstock live center is a rotating support tool used with a wood lathe, specifically attached to the tailstock, which is the non-driving end of the lathe. The live center helps balance and stabilize the workpiece while it rotates.
Features:
- Installation and removal are quick and hassle-free, letting you focus on your creativity rather than setup.
- This live center has a pointed tip that rotates with the workpiece, reducing friction and wear compared to stationary or "dead" centers.
- Designed with ball bearings for seamless rotation, ensuring that you achieve excellent results with minimal effort.
- Ideal for a wide range of woodworking projects, from turning bowls and pens to crafting intricate designs, making it a must-have for both hobbyists and professional woodworkers.
- By providing support at both ends, the live center helps to minimize vibrations, leading to smoother finishes.
- Offers better control and precision when working on long or delicate pieces.
Key steps to using a live centre:
Select the right size: Choose a live center with the correct Morse Taper to fit your lathe's tailstock spindle. For example, choose a 1MT live centre to fit a 1MT lathe, or a 2MT live centre to fit a 2MT lathe.
Clean the taper: It's always a good idea to give the live centre and the tailstock spindle a quick clean before installing, to remove debris for a more secure fit.
Install the live center: insert the tapered shank of the live center directly into the 2MT taper in the tailstock spindle, ensuring it is fully seated and secure.
Center the workpiece: Make sure the live center is aligned with the headstock center. You can check visually or with an alignment tool.
Tighten the tailstock: Carefully slide the tailstock live center into contact with the center of the loose end of your project, applying gentle pressure to secure the workpiece.
Start turning: Once the workpiece is securely held, begin turning on the lathe at a suitable speed.
Safety first: Always ensure the headstock and the tailstock are aligned correctly before starting the lathe. Always follow the safety guidelines of your lathe.
Share
