Skip to product information
1 of 3

RGWOOD

RGWOOD 1" Multipoint Chuck Drive Spur with Spring Center

RGWOOD 1" Multipoint Chuck Drive Spur with Spring Center

Regular price $24.95 CAD
Regular price Sale price $24.95 CAD
Sale Sold out
Shipping calculated at checkout.
Quantity

RGWOOD 1″ Multipoint Chuck Drive Spur with Spring Center

This RGWOOD 1" Multipoint Chuck Drive Spur with Spring Center will mount in most wood lathe chucks for an easy switch to spindle turning. The multiple points on these spurs provide superior holding power, while causing minimal marking on the work piece compared to other spur centers - on the bottom of a chair leg, for example, it leaves only a circle of tiny holes with another small hole in the center. In addition, the spring loaded center makes this chuck spur easy to align and mount.

What is a chuck spur?

A lathe chuck spur, also called a "chuck center" or "drive center," is a small, pointed piece that fits into the jaws of your woodlathe chuck, securely holding your work piece in preparation for turning. This is ideal particularly for spindle turning, and works by providing a central point of contact for the tailstock live center to push against. To use it a chuck spur, simply insert the spur into the chuck jaws, tighten the chuck, align the work-piece's center with the spur, and then engage the tailstock live center to push against the workpiece and keep it stable while turning.

 

Key steps to using a lathe chuck spur:

Select the right size: Choose a chuck spur that fits snugly within the jaws of your lathe chuck.

Mount the spur: Place the spur into the chuck jaws and tighten the chuck firmly.

Center the workpiece: Align the tip of the spur with the center of your workpiece.

Engage the tailstock: Carefully slide the tailstock live center into contact with the center of the other end of your project, applying gentle pressure to secure the workpiece.

Start turning: Once the workpiece is securely held, begin turning on the lathe at a suitable speed.

Important points to remember:

Drilling a pilot hole:
For better stability, you may need to drill a small pilot hole in the center of your workpiece to accommodate the chuck spur.

Safety first:
Always ensure the chuck is properly tightened and the tailstock is aligned correctly before starting the lathe.

Looking for a different size or taper? We likely carry it! Check out the links below.

RGWOOD

Chuck Drive Spurs

RGWOOD 1″ Multipoint Chuck Drive Spur with Spring Center

RGWOOD 5/8″ Multipoint Chuck Drive Spur with Spring Center

1MT Drive Spurs

RGWOOD 1MT 1″ Multipoint Drive Spur with Spring Center

RGWOOD 1MT Drive Spur

2MT Drive Spurs

RGWOOD 2MT 1″ Multipoint Drive Spur with Spring Center

RGWOOD 2MT 5/8″ Multipoint Drive Spur with Spring Center

NOVA

NOVA NCSC Chuck Spur Centre

NOVA 9021 1-1/4″ Flexible Point Drive Centre

NOVA 9019 1/2″ Flexible Point Drive Centre

NOVA 9020 7/8″ Flexible Point Drive Centre

View full details