Skip to product information
1 of 10

Nova

Nova Chuck Adapter Inserts

Nova Chuck Adapter Inserts

Regular price $29.99 CAD
Regular price Sale price $29.99 CAD
Sale Sold out
Shipping calculated at checkout.
Insert Type
Quantity

Nova Chuck Adapter Insert

Nova chuck inserts allow you to adapt your insert type NOVA chuck to your lathe, and also to keep the same chuck and accessories if you change your lathe. You only need to change the insert/adaptor. Select the internal thread option that matches your lathe. The external thread matches the NOVA insert type chucks to simply screw in. Then your NOVA insert type chuck is ready to attach to your threaded lathe spindle. NOVA Insert Type Chucks include: G3 and SuperNOVA2. Use only genuine NOVA accessories and parts with your NOVA chucks.

  • NOVA has a range of chucks along with inserts in order to fit the majority of lathes that are currently available on the market.
  • The insert/adaptor versions of NOVA chucks all use the same insert/adaptor system to ensure maximum adaptability and flexibility for the user.

HOW DOES THE INSERT SYSTEM WORK?

The insert fits into the back of the chuck and onto your lathe headstock spindle. The inserts are threaded both inside and out. The outside thread is made to fit into the NOVA Chucks. The inside thread comes in a variety of sizes. The size you need is determined by your lathe spindle thread size. See the insert thread chart below.

If you have reliable information for your spindle thread size but there is no match on the chart, you may have an unusual lathe that NOVA doesn’t have an adaptor for. You will need to purchase a blank chuck or a blank insert/adaptor and get it threaded to your requirements.

Some thread sizes we direct thread into the chuck body. Therefore, these don’t require insert adaptors. A directly threaded chuck body cannot be altered to an insert type body or another thread size once threaded. Be sure that your lathe thread size is not covered by the insert/adaptors first!

Terms:
BSF: British Standard Fine
BSW: British Standard Whitworth
RH: Right hand
LH: Left hand
TPI: Threads per inch
UN: Unified National Standard
UNC: Unified Coarse Standard
UNF: Unified Fine Standard
UNS: Unified Special

Chuck Insert/Adaptors

The thread sizes listed are the size which the adaptor converts to
(e.g. The thread size listed in the table should match the thread size on your lathe spindle.)
Click here if you don’t know your lathe spindle thread size.

Sizes listed below are subject to change.
Always best to check with your lathe manual and manufacturer.

SKU Thread
Diam.
Pitch Thread
Direction
Standard Compatible
Lathes
Set Screw
I2NS M20 2 RH Tyme Cub
I3NS M20 1.5 RH Electra Beckum,
Multico Sumaro
I4NS M33 1.5 RH OneWay,
Multico Sumaro
I6NS 3/4″ Plain Bore M6
I7NS 1 1/8″ 8TPI UN(NOT UNC)
I8NS 7/8″ 12TPI LH NS
I9NS 3/4″ 16TPI RH (with 6mm register)
IANS 3/4″ 14TPI RH BSP TL1000 (pre 1986)
IBNS 3/4″ 14TPI LH BSP TL1000 (pre 1986)
ICNS 1″ 10TPI RH BSF TL1000, Woodfast/Durden
IDNS 1″ 8TPI RH UNC Delta, Rockwell, Golding,
General, NOVA Comet (North America)
and Mercury lathes
IENS 1″ 12TPI RH UNF Myford ML8
Turnstyler
IHNS 3/4″ 10TPI RH BSW Rockwell
Homecraft
IINS M24 3 RH B-Line
Arundel K600/K450
IJNS 1 1/8″ 12TPI RH BSW Myford Mystro
Masterlathe (New Zealand)
IKNS M18 2.5 RH Elu DB 180
ILNS 1 1/4″ 8TPI RH NOVA Galaxi, NOVA Saturn, NOVA DVR 3000, NOVA XP, NOVA 1624 and 1624 II (North America) M6
IMNS 1″ 10TPI LH BSF TL1000
Woodfast/Durden
INNS Blank (Can be threaded up to 28mm)
IONS 1 1/8″ 7TPI RH BSW Morton
IQNS M30 3.5 RH NOVA TL1500/3000/Comet
(European & S. Hemisphere)
Woodfast
IRNS 1″ 8TPI RH Jet 1221 Lathe
ISNS 5/8″ Plain Bore Designed Specifically for Shopsmith Pro V and Power Pro Machines M6
ITNS 1″ 8TPI Dual Threaded LH & RH NOVA Mercury Mini Lathe
IUNS 1 1/8″ 12TPI RH UNF Taiwanese lathes
IVNS 7/8″ 14TPI RH NF
IYNS 1 1/4″ 8TPI RH For lathes don’t
have reverse turning ability
IWNS M25 2 RH Tyme Avon (’83 on) and Classic Tanner SD165, Selbix Springwood, Sorby, Cotech
IXNS 1″ 8TPI RH Designed specifically for the NOVA Comet II Midi Lathe,
features lock for the reverse function.
M6
View full details
  • 5 stars: 0 (0%)
  • 4 stars: 1 (100%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
W
Wendell P. Nierman
Just ordered the insert.

Just ordered the insert. I am expecting it to work well.