Nova
NOVA 9083 Adapter
NOVA 9083 Adapter
Couldn't load pickup availability
The NOVA 9083 Adapter is compatible with NOVA chucks and threaded accessories. It adapts lathe spindle tooling to another lathe with a different threaded spindle, allowing your chucks and faceplates to be interchangeable between lathes with different spindle sizes. Threading on this product is M33 x 3.5 female to 1¼″ x 8TPI male.
NOVA Spindle Adaptor Options
- 9083 – M33 x 3.5 female to 1¼″ x 8TPI male
- 9084 – M33 x 3.5 female to 1″ x 8TPI male
- 9085 – 1¼″ x 8TPI female to 1″ x 8TPI male
- 9086 – 1″ x 8TPI female to 1¼″ x 8TPI male
About NOVA Spindle Adaptors
Provides solutions for those moving from larger to smaller lathe threads and vice versa. These adaptors allow you to share your favourite tooling between multiple lathes without the expense of duplicating tooling.
Important Note
As this adaptor is used to create a lathe spindle size that will hold a variety of accessories, run-out and performance may vary depending on what accessories are being used. NOVA cannot guarantee run-out or performance of accessories while using this thread adaptor. These specialized thread adaptors also carry a different warranty from standard NOVA chucks and chuck inserts/adaptors.
Mounting the Spindle Adaptor
The spindle adaptor needs to be located and screwed onto the lathe spindle. Use the nylon washer provided to allow for a tight, solid fit against the lathe spindle — this makes the adaptor easier to remove when finished. Ensure both surfaces of the threaded adaptor are located against the flat of the lathe spindle and that it is tightly seated in the accessory used.
Warning: Ensure the set screw is tightly secured against the lathe spindle for proper locking.
Share
