BSI
Cyanoacrylate Glues
Cyanoacrylate Glues
Couldn't load pickup availability
Cyanoacrylate Glues
We have an extensive selection of Cyanoacrylate Glues including:
- Maxi-Cure (Extra Thick)
- Insta-Cure+ (Medium)
- Insta-Cure (Super Thin)
- Insta-Set CA Glue Accelerator
MAXI-CURE CA Glue (Extra Thick)
The Maxi-Cure CA Glue (Extra Thick) is the ultimate solution for bonding a wide range of plastics, including GE’s Lexan. It is indispensable for plastic model assembly as Maxi-cure ensures a flawless integration with plastic surfaces.
Additionally, Maxi-cure glue is set apart from conventional glue due to its compatibility with the INSTA-SET accelerator. This extra thick Cyanoacrylate glue excels in filling voids and facilitating modifications with ease.
Furthermore, Maxi-cure is crafted to deliver precision, and can be shaped using a knife or razor blade, or it can be seamlessly finished through sanding. Maxi-Cure™ blends durability, adaptability, and affordability, making it the preferred choice across various applications.
INSTA-CURE + CA Glue (Medium)
Insta-Cure+ CA Glue (Medium) is a higher viscosity Cyanoacrylate glue for loose fitting joints. The adhesive bridges the gaps. Normally, you would first apply the thicker CA one surface. Then, you would hold the parts tightly together for about 5 to 10 seconds. However, for large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used.
Pro tips:
- To prevent premature curing, don’t spread the glue into a thin film.
- Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
INSTA-CURE CA Glue (Super Thin)
Insta-Cure CA Glue (Super Thin) has a water-thin viscosity! With its thin viscosity, it wicks deep into joints by capillary action and cures in a matter of 1-3 seconds. Make sure the surfaces being bonded are tight fitting. Then, hold the items together while you apply the CA around the edges of the seam. Be aware: as the super thin CAs cures, they give off a vapor that can irritate the nose and eyes. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.
INSTA-SET Cyanoacrylate Glues Accelerator
-
Prepare the Surfaces: Ensure that the surfaces you intend to bond are clean, dry, and free from dust or grease. This preparation helps to maximize the effectiveness of the adhesive bond.
-
Apply the CA Adhesive: Dispense a small amount of cyanoacrylate adhesive onto one of the surfaces. Use the appropriate amount based on the size of the bonding area.
-
Position the Parts: Quickly position the parts together, aligning them as needed. Cyanoacrylate adhesives bond almost instantly upon contact, so ensure correct alignment before pressing firmly.
-
Apply the Accelerator: Immediately after joining the parts, apply the cyanoacrylate accelerator (Insta-Set) to the adhesive joint. You can do this by spraying the accelerator directly onto the bonded area or by applying it using a brush or applicator tip if it's in liquid form.
-
Allow Bond to Cure: The bond should set almost instantly upon applying the accelerator. However, it's advisable to leave the parts undisturbed for a few more seconds to ensure the adhesive fully cures and achieves maximum strength. If you are attempting to bond a very large crack, give it more time to cure.
-
Clean Up: Clean any excess adhesive or accelerator from the bonded area if needed. Use caution, as the adhesive and accelerator can bond skin instantly as well.
Additional Considerations:Using a cyanoacrylate (CA) glue accelerator, like Insta-Set, is straightforward and can significantly speed up the bonding process. Here’s how you typically use it:
-
Compatibility: All our RGWOOD CA glues are compatible with the Insta-Set Glue Accelerator
- Safety: With use of all Epoxy Glues and Cyanoacrylates, wear protective gloves and work in a well-ventilated area to avoid skin contact and inhalation of fumes, as cyanoacrylate adhesives and accelerators can be irritating to the skin and respiratory system.
Share
