Nova
NOVA JSCOLE 10″ Cole Jaw Set (for lathes with 12″ swing or larger)
NOVA JSCOLE 10″ Cole Jaw Set (for lathes with 12″ swing or larger)
Couldn't load pickup availability
NOVA JSCOLE 10″ Cole Jaw Set (for lathes with 12″ swing or larger)
Expand the range and capacity of your standard NOVA chuck.
The NOVA Jscole 10" Cole Jaw Set is an accessory for Nova chucks, designed to expand the range and capacity of your standard Nova chuck for specific projects and applications.
This is a versatile ten inch cole jaw set by NOVA. Popular uses include the re-chucking of bowls to remove previous chuck marks, add decoration, or re-shape the bottoms of bowls that have already been turned.
Other Nova jaw sets can be fitted to the Cole Jaws making a combination jaw facility – expanding dovetail facility for mounting bowls/platters and a reverse dovetail for mounting footed bowls/platters.
Many advantages over traditional vacuum chucking. Customizable with false wooden jaws.
These are standard cole jaws and are suitable for lathes with minimum 12”/300mm swing diameter.
Mini Cole Jaws are available as well, and are suitable for lathes with a minimum 8”/203mm swing diameter.


|
TIPS N TRICKS! While traditionally these type of jaws are used in the compression mode – depending on the bowl shape, the jaws can be used to grip in either the contracting or expanding mode. To ensure best grip, the bowl should have a positive or negative flair towards the edge of the bowl. Try and avoid straight sided bowls where the grip will be less efficient. Best cutting technique is to have a cutting action with the chisel such that much of the force is directed towards the headstock, not across the face.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
CUSTOMIZING THE COLE JAW USING WOODEN JAWS If larger or heavier bowls need to be re-chucked, then the customer can make their own customized wooden jaws. These should be fastened onto each jaw segment using two screw positions. The customer should give careful consideration into the type of holding situation that is required before false wooden jaws are made, to ensure adequate gripping is achieved. Jaw segments can be made from Medium Density Fibreboard (MDF)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Jaw Travel Range Table Imperial (Inch)
Metric (mm)
Please note, Tolerance of +/-1mm on all measurements * Measurements with stop-screw ** Recommended with Caution |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Share
