{"product_id":"oneway-20-24-complete-laser-hollowing-system","title":"ONEWAY 20\"-24\" Complete Laser Hollowing System","description":"\u003ch1\u003eONEWAY 20\"-24\" Complete Laser Hollowing System\u003c\/h1\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003eWHAT DOES IT DO? \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eLaser guided hollowing systems allow the turner to easily gauge the wall thickness of a vessel while it is being cut. \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003eHOW DOES IT WORK?\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eA laser pointer is set so the laser light is offset from the cutting tip by the desired wall thickness of the vessel. When the hollowing process is started the laser will point mostly to the middle of the vessel. As the vessel is hollowed and the cutting tip moves outward the laser light follows. Once the cutter reaches the desired thickness, the laser light falls off the vessel. \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cstrong\u003eWHAT LATHE(S) CAN IT BE USED ON?\u003c\/strong\u003e \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eThe laser light system can be used on any machine with a flat bed that can support a rear back rest. A rear back rest support is necessary because the laser light must be held square to the bed of the lathe. \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cstrong\u003eWHAT MAKES ONEWAY'S HOLLOWING SYSTEM UNIQUE TO OTHER LASER SYSTEMS?\u003c\/strong\u003e \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eOne of the difficulties of laser pointers is that as you move about the form the laser pointer must be constantly adjusted to keep the laser perpendicular to the area of the vessel that is being cut.\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eThe Oneway laser point is designed so that it can be easily adjusted to be perpendicular to the wall of the vessel while the cutter is still inside the vessel.\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cstrong\u003eWHY IS THE ONEWAY SYSTEM BETTER?\u003c\/strong\u003e \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eThe Oneway Laser-Guided Hollowing System has been designed to make turning hollow forms easier and safer. Back arresting the hollowing bar reduces the strength needed to control the bar and controls twisting forces which allows the use of offset bars. The backrest is large, and easily adjustable for both overall height and height of the gate.\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eThe bars are stainless steel and 5\/8” in diameter. The 5\/8” diameter was chosen as it allows easier access around the tight neck of a vessel where vibration is not a problem. For deeper vessels an optional\u003cstrong\u003e\u003cspan style=\"color: #008000;\"\u003e \u003ca style=\"color: #008000;\" href=\"https:\/\/woodworkerspecialties.com\/product\/oneway-3485-5-8-to-3-4-bar-adapter-for-laser-hollowing-system\/\"\u003e¾” bar adaptor\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e is available as well as a 1” straight bar.\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eBecause the tips can be rotated, only three bars are required to hollow a 7 inch diameter sphere through a 1 inch hole with a 1 inch long neck.\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cstrong\u003eWHICH TOOLS ARE RECOMMENDED FOR A BASIC SYSTEM?\u003c\/strong\u003e \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eTo make full use of the system you should use all the bars. The most used bars are the straight and single bend. More difficult shapes can be achieved using the double bend. Deeper vessels require the 1 inch straight bar.\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cstrong\u003eHOW DEEP CAN I HOLLOW USING THIS SYSTEM?\u003c\/strong\u003e \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eHow deep you can go is a hard question to answer. It depends on the type of wood, the kind of lathe, your experience and your patience. Most people will be able to hollow 9 inches deep relatively easily with the standard 5\/8” bars.\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cstrong\u003eWHAT IS THE CUTTER MADE FROM?\u003c\/strong\u003e \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eThe cutter is made from M2 HSS.\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003eHOW IS THE CUTTER SHARPENED?\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eThe cutter can be easily sharpened on a grinder. It is ground on the outside like any standard scraper. It can also be honed on the top if required.\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cstrong\u003eIS THE BACK REST ADJUSTABLE?\u003c\/strong\u003e \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eThe Oneway backrest can be adjusted for height with two screw adjusters. This allows you to get the backrest flat and the right height. The height of the opening in the gate is also adjustable with screw adjustment. The gate can also be propped open to allow easy insertion and removal or heavy boring bars; the gate can then be set back shut to the preset height.\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eThe backrest is offset and has a slotted base so it can be set with the wide part of the backrest to the front or to the back and for very large offsets it can be rotated. \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cstrong\u003eDO I HAVE TO BE AN ADVANCED TURNER TO USE THE SYSTEM?\u003c\/strong\u003e \u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003eHollow turning is difficult as you are working blind. The Oneway hollowing system removes most of the problems by giving you a visual aid to where the tool is. You still need a basic knowledge of the proper way to hollow a vessel but now execution is greatly simplified. \u003c\/div\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":43887134408767,"sku":"ONE-3518","price":670.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/OnewayCatV10-126-500x500-1.jpg?v=1789529528","url":"https:\/\/woodworkerspecialties.com\/products\/oneway-20-24-complete-laser-hollowing-system","provider":"Woodworker Specialties","version":"1.0","type":"link"}