{"title":"Lathe Accessories","description":"\u003cp\u003eFaceplates, Centers, Adapters, Extenders, Calipers\u003c\/p\u003e","products":[{"product_id":"nova-inserts","title":"Nova Chuck Adapter Inserts","description":"\u003ch1\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNova Chuck Adapter Insert\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNova chuck inserts allow you to adapt your insert type NOVA chuck to your lathe, and also to keep the same chuck and accessories if you change your lathe. You only need to change the insert\/adaptor. Select the internal thread option that matches your lathe. The external thread matches the NOVA insert type chucks to simply screw in. Then your NOVA insert type chuck is ready to attach to your threaded lathe spindle. NOVA Insert Type Chucks include: G3 and SuperNOVA2. Use only genuine NOVA accessories and parts with your NOVA chucks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNOVA has a range of chucks along with inserts in order to fit the majority of lathes that are currently available on the market.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe insert\/adaptor versions of NOVA chucks all use the same insert\/adaptor system to ensure maximum adaptability and flexibility for the user.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eHOW DOES THE INSERT SYSTEM WORK?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe insert fits into the back of the chuck and onto your lathe headstock spindle. The inserts are threaded both inside and out. The outside thread is made to fit into the NOVA Chucks. The inside thread comes in a variety of sizes. The size you need is determined by your lathe spindle thread size. See the insert thread chart below.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIf you have reliable information for your spindle thread size but there is no match on the chart, you may have an unusual lathe that NOVA doesn’t have an adaptor for. You will need to purchase a blank chuck or a blank insert\/adaptor and get it threaded to your requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSome thread sizes we direct thread into the chuck body. Therefore, these don’t require insert adaptors. A directly threaded chuck body cannot be altered to an insert type body or another thread size once threaded. Be sure that your lathe thread size is not covered by the insert\/adaptors first!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eTerms:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBSF: British Standard Fine\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBSW: British Standard Whitworth\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH: Right hand\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eLH: Left hand\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eTPI: Threads per inch\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUN: Unified National Standard\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUNC: Unified Coarse Standard\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUNF: Unified Fine Standard\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUNS: Unified Special\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eChuck Insert\/Adaptors\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe thread sizes listed are the size which the adaptor converts to\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e(e.g. The thread size listed in the table should match the thread size on your lathe spindle.) \u003ca href=\"https:\/\/www.teknatool.com\/thread\/\" rel=\"noopener noreferrer\" style=\"color: rgb(0, 0, 0);\" target=\"_blank\"\u003e\u003cbr\u003eClick here if you don’t know your lathe spindle thread size. \u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSizes listed below are subject to change.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eAlways best to check with your lathe manual and manufacturer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth bgcolor=\"#d3d3d3\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSKU\u003c\/span\u003e\u003c\/th\u003e\n\u003cth bgcolor=\"#d3d3d3\"\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThread\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDiam.\u003c\/span\u003e\n\u003c\/th\u003e\n\u003cth bgcolor=\"#d3d3d3\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePitch\u003c\/span\u003e\u003c\/th\u003e\n\u003cth bgcolor=\"#d3d3d3\"\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThread\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDirection\u003c\/span\u003e\n\u003c\/th\u003e\n\u003cth bgcolor=\"#d3d3d3\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eStandard\u003c\/span\u003e\u003c\/th\u003e\n\u003cth bgcolor=\"#d3d3d3\"\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eCompatible\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eLathes\u003c\/span\u003e\n\u003c\/th\u003e\n\u003cth bgcolor=\"#d3d3d3\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSet Screw\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eI2NS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eM20\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e2\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e RH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e Tyme Cub\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eI3NS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eM20\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1.5\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e RH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e Electra Beckum,\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMultico Sumaro\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eI4NS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eM33\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1.5\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e RH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e OneWay,\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMultico Sumaro\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eI6NS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3\/4″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd colspan=\"3\" align=\"center\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePlain Bore\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e M6\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eI7NS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1 1\/8″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e8TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUN(NOT UNC)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eI8NS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e7\/8″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e12TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eLH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eI9NS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3\/4″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e16TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e(with 6mm register)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIANS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3\/4″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e14TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBSP\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e TL1000 (pre 1986)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIBNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3\/4″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e14TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eLH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBSP\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e TL1000 (pre 1986)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eICNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e10TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBSF\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e TL1000, Woodfast\/Durden\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIDNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e8TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUNC\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e Delta, Rockwell, Golding,\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eGeneral, NOVA Comet (North America)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eand Mercury lathes\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIENS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e12TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUNF\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e Myford ML8\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eTurnstyler\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIHNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3\/4″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e10TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBSW\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e Rockwell\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eHomecraft\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIINS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eM24\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e B-Line\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eArundel K600\/K450\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIJNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1 1\/8″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e12TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e BSW\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e Myford Mystro\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMasterlathe (New Zealand)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIKNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eM18\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e2.5\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e Elu DB 180\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eILNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1 1\/4″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e8TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNOVA Galaxi, NOVA Saturn, NOVA DVR 3000, NOVA XP, NOVA 1624 and 1624 II (North America)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e M6\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIMNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e10TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eLH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBSF\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e TL1000\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWoodfast\/Durden\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eINNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd colspan=\"5\" align=\"center\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBlank (Can be threaded up to 28mm)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIONS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1 1\/8″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e7TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBSW\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eMorton\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIQNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eM30\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e3.5\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNOVA TL1500\/3000\/Comet\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e(European \u0026amp; S. Hemisphere)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eWoodfast\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIRNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e8TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eJet 1221 Lathe\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eISNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e5\/8″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd colspan=\"3\" align=\"center\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePlain Bore\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDesigned Specifically for Shopsmith Pro V and Power Pro Machines\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e M6\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eITNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e8TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDual Threaded LH \u0026amp; RH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNOVA Mercury Mini Lathe\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIUNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1 1\/8″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e12TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eUNF\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eTaiwanese lathes\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIVNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e7\/8″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e14TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eNF\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIYNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1 1\/4″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e8TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eFor lathes don’t\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ehave reverse turning ability\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIWNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eM25\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e2\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e Tyme Avon (’83 on) and Classic Tanner SD165, Selbix Springwood, Sorby, Cotech\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIXNS\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e1″\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e8TPI\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRH\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eDesigned specifically for the NOVA Comet II Midi Lathe,\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003efeatures lock for the reverse function.\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e M6\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Nova","offers":[{"title":"1\" x 8 tpi (IXNS)","offer_id":43802445938751,"sku":"LL-IXNS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"1-1\/4\" x 8 tpi (ILNS)","offer_id":43802445971519,"sku":"LL-ILNS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"7\/8\" x 14 tpi (IVNS Old Beaver Rockwell)","offer_id":43802446004287,"sku":"LL-IVNS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"M33 x 3.5 (I4NS)","offer_id":43805613719615,"sku":"LL-I4NS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"5\/8\" Plainbore (ISNS Shopsmith)","offer_id":43805613785151,"sku":"LL-ISNS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"1-1\/8″ x 8 tpi UN RH (I7NS)","offer_id":43805613817919,"sku":"LL-I7NS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"1″ x 8 tpi RH\/LH (ITNS)","offer_id":43805613850687,"sku":"LL-ITNS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"M18 x 2.5 (IKNS)","offer_id":43805613883455,"sku":"LL-IKNS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"3\/4″ x 10 tpi RH (IHNS)","offer_id":43805613916223,"sku":"LL-IHNS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"1″ x 12 tpi RH (IENS)","offer_id":43805613948991,"sku":"LL-IENS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"M30 x 3.5 (IQNS)","offer_id":43805613981759,"sku":"LL-IQNS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"1-1\/8″ x 12 tpi (IUNS)","offer_id":43805614014527,"sku":"LL-IUNS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"1-1\/8″ x 7 tpi BSW RH (IONS)","offer_id":43805614047295,"sku":"LL-IONS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"1″ x 10 tpi RH (ICNS)","offer_id":43805614080063,"sku":"LL-ICNS","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"3\/4\" x 16 tpi (I9NS)","offer_id":43805630365759,"sku":"LL-I9NS","price":29.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/IXNS-A.jpg?v=1787951556"},{"product_id":"martel-4-way-calipers-for-woodturners-made-in-canada","title":"MARTEL 4 Way Calipers for Woodturners","description":"\u003cp\u003eDeveloped by woodturner extraordinaire Andre Martel in Quebec, Canada, the Martel calipers are t\u003cspan class=\"fontstyle0\"\u003ehe most universal and user-friendly thickness calipers you can buy. Available in\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"fontstyle2\"\u003e3 sizes\u003c\/span\u003e\u003cspan class=\"fontstyle0\"\u003e, for all your\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"fontstyle0\"\u003eturning sizes and shapes of\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"fontstyle0\"\u003eh\u003c\/span\u003e\u003cspan class=\"fontstyle0\"\u003eollowing out deep vessels, vases, bowls, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique design allows you to reach deep into smaller vessels, unlike most others which need a larger opening, and the double-endedness allows you to see EXACTLY what the measurement is on the end deeply buried in your project.\u003c\/p\u003e\n\u003cp\u003eAvailable in 3 sizes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmall (6-12) = 6 ‘’ deep reach or 12’’ overall . Will measure a 12’’ diam bowl to the right center, and a 14’’ bowl to 1’’ from center.\u003c\/li\u003e\n\u003cli\u003eMedium (10-20) = 10‘’ deep reach or 20’’ overall . Will measure a 20’’ diam bowl to the right center, and a 22’’ bowl to 1’’ from center.\u003c\/li\u003e\n\u003cli\u003e Large (14-28) = 14‘’ deep reach or 28’’ overall . Will measure a 28’’ diam bowl to the right center, and a 30’’ bowl to 1’’ from center.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Martel","offers":[{"title":"Large: 14\" - 28\"","offer_id":43826326798399,"sku":"MAR-M4WC-L","price":199.95,"currency_code":"CAD","in_stock":true},{"title":"Medium: 10\" - 20\"","offer_id":43826326831167,"sku":"MAR-M4WC-M","price":131.95,"currency_code":"CAD","in_stock":true},{"title":"Small: 6\" - 12\"","offer_id":43826326863935,"sku":"MAR-M4WC-S","price":64.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/MAR-M4WC-S_calipers_4_way_small_c4c9fed1-b571-4e58-b7a3-4379fb7fffbd.webp?v=1789179211"},{"product_id":"nova-25947-tool-rest-locking-assembly","title":"NOVA 25047 Tool Rest Locking Assembly","description":"\u003cp\u003eTool Rest Locking assembly for Nova DVR3000, Saturn, 1624.\/44, etc\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826544771135,"sku":"LL-25047","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/IMG_1481.jpg?v=1788564439"},{"product_id":"nova-27014-1x5-tool-post","title":"Nova 27014 1\"X5\" Tool Post","description":"\u003cp\u003eThe NOVA 27014 1″ × 5″ Tool Post is an update to the old tool post (NOVA 9025), now double-ended with both M10 and M12 threading for enhanced versatility. It enables you to attach both older M10 and newer M12 modular NOVA tool rest bars.\u003c\/p\u003e\n\u003cp\u003eThe 1″ (25.4mm) shaft with 5″ (127mm) length fits most wood lathe toolslide shafts, including all NOVA lathes (excluding mini lathes). Check your lathe manual or supplier for compatibility details.\u003c\/p\u003e\n\u003ch4\u003eNOVA Modular Tool Rest System\u003c\/h4\u003e\n\u003cp\u003eThis product is part of the NOVA Modular Tool Rest System — a flexible system that lets you mix and match tool rest posts and supports to create the perfect setup for your needs. Simply choose your tool bar, box rest, or bowl rest for the top, and pair it with your preferred post.\u003c\/p\u003e\n\u003ch4\u003eAbout Nova\u003c\/h4\u003e\n\u003cp\u003eFor over four decades, since 1978, NOVA has been synonymous with cutting-edge advancements in woodturning. In 1988, we pioneered the industry with the world’s first 4-jaw self-centering chuck system, setting new standards for precision and versatility. This unmatched original design reflects our commitment to excellence, earning us Wood Magazine’s “Best Innovation of the Past 25 Years” award.\u003c\/p\u003e\n\u003cp\u003eWith one of the most extensive ranges of chucks and jaws, NOVA continues to lead the industry with a commitment to innovation. Experience NOVA’s unparalleled holding power, interchangeability, reliability, and value — backed by a 10-year warranty on chucks and jaws (excluding soft jaws). Our NOVA tools are expertly designed with woodturners, for woodturners. Your passion inspires our design.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826544803903,"sku":"LL-27014","price":25.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/NOVA-LL-27014_1x5_inch_tool_post_1.webp?v=1788564440"},{"product_id":"nova-27018-1x8-tool-post","title":"Nova 27018 1\"x8\" Tool Post","description":"\u003cp\u003eThe NOVA 27018 1″ × 8″ Tool Post is an update to the old tool posts, now double-ended with both M10 and M12 threading for enhanced versatility. It enables you to attach both older M10 and newer M12 modular NOVA tool rest bars.\u003c\/p\u003e\n\u003cp\u003eThe 1″ (25.4mm) shaft with 8″ (203mm) length fits most wood lathe toolslide shafts, including all NOVA lathes (excluding mini lathes). Check your lathe manual or supplier for compatibility details.\u003c\/p\u003e\n\u003ch4\u003eNOVA Modular Tool Rest System\u003c\/h4\u003e\n\u003cp\u003eThis product is part of the NOVA Modular Tool Rest System — a flexible system that lets you mix and match tool rest posts and supports to create the perfect setup for your needs. Simply choose your tool bar, box rest, or bowl rest for the top, and pair it with your preferred post.\u003c\/p\u003e\n\u003ch4\u003eAbout Nova\u003c\/h4\u003e\n\u003cp\u003eFor over four decades, since 1978, NOVA has been synonymous with cutting-edge advancements in woodturning. In 1988, we pioneered the industry with the world’s first 4-jaw self-centering chuck system, setting new standards for precision and versatility. This unmatched original design reflects our commitment to excellence, earning us Wood Magazine’s “Best Innovation of the Past 25 Years” award.\u003c\/p\u003e\n\u003cp\u003eWith one of the most extensive ranges of chucks and jaws, NOVA continues to lead the industry with a commitment to innovation. Experience NOVA’s unparalleled holding power, interchangeability, reliability, and value — backed by a 10-year warranty on chucks and jaws (excluding soft jaws). Our NOVA tools are expertly designed with woodturners, for woodturners. Your passion inspires our design.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826544836671,"sku":"LL-27018","price":25.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/NOVA-LL-27018_1x8_inch_tool_post_1.webp?v=1788564441"},{"product_id":"nova-27020-6-m12-tool-rest-bar","title":"Nova 27020 6\" M12 Tool Rest Bar","description":"\u003cp\u003eThe NOVA 27020 6″ M12 Tool Rest Bar has been upgraded from M10 to M12 threading to provide greater support and a more powerful grip, reducing the risk of breakage. Part of the NOVA Modular Tool Rest System — a flexible system that lets you mix and match tool rest posts and supports to create the perfect setup for your needs. Requires a NOVA tool rest post (sold separately).\u003c\/p\u003e\n\u003cp\u003eThe 6″ (152mm) length is ideal for more precise tool control on smaller work at the lathe. Made from cast steel with a stainless-steel top rod for durability and smooth operation.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: This replaces the discontinued M10 version (SKU 9027).\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eNOVA Modular Tool Rest System\u003c\/h4\u003e\n\u003cp\u003eThe NOVA Modular Tool Rest System gives you the ultimate flexibility — simply choose your tool bar, box rest, or bowl rest for the top, and pair it with your preferred post.\u003c\/p\u003e\n\u003ch4\u003eAbout Nova\u003c\/h4\u003e\n\u003cp\u003eFor over four decades, since 1978, NOVA has been synonymous with cutting-edge advancements in woodturning. In 1988, we pioneered the industry with the world’s first 4-jaw self-centering chuck system, setting new standards for precision and versatility. This unmatched original design reflects our commitment to excellence, earning us Wood Magazine’s “Best Innovation of the Past 25 Years” award.\u003c\/p\u003e\n\u003cp\u003eWith one of the most extensive ranges of chucks and jaws, NOVA continues to lead the industry with a commitment to innovation. Experience NOVA’s unparalleled holding power, interchangeability, reliability, and value — backed by a 10-year warranty on chucks and jaws (excluding soft jaws). Our NOVA tools are expertly designed with woodturners, for woodturners. Your passion inspires our design.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826544869439,"sku":"LL-27020","price":41.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/IMG_1576.jpg?v=1788564443"},{"product_id":"nova-2mtna-acruline-2mt-lathe-alignment-accessory","title":"NOVA 2MTNA Acruline 2MT Lathe Alignment Accessory","description":"\u003cp\u003eThe NOVA 2MTNA Acruline is a double-ended #2 Morse Taper alignment accessory that fits into both the tailstock and headstock spindles of your lathe. Use it to quickly check and correct alignment on lathes with adjustable tailstocks or headstocks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuick alignment check for any 2MT lathe.\u003c\/li\u003e\n\u003cli\u003eBrings the lathe back into alignment (for lathes with adjustable headstocks or tailstocks).\u003c\/li\u003e\n\u003cli\u003eDouble-ended 2MT.\u003c\/li\u003e\n\u003cli\u003eSolid steel, precision machined.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826544967743,"sku":"LL-2MTNA","price":23.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/NOVA-LL-2MTNA_acruline_lathe_alignment_accessory_1.webp?v=1788564444"},{"product_id":"nova-toolslide-toolrest-assembly-for-1624-lathe","title":"NOVA 3000TSU Banjo Toolslide and Toolrest Assembly for 1624, Saturn and DVRXP Lathes","description":"\u003cp\u003eToolslide and Toolrest Assembly for 1624 Lathe, Saturn and DVRXP lathes.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826545000511,"sku":"LL-3000TSU","price":199.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/NOVA-LL-3000TSU_banjo_toolslide_toolrest_assembly_for_1624_Saturn_DVRXP_lathes.webp?v=1788564445"},{"product_id":"nova-5016-chuck-accessory-tailstock-adaptor","title":"NOVA 5016 Chuck Accessory Tailstock Adapter","description":"\u003cp\u003eThe NOVA 5016 Tailstock Adaptor fits all NOVA lathes, other lathes with a 2MT tailstock, and NOVA chucks. It ensures the most accurate remounting of projects, allowing perfect alignment when turning the other side in dead or live modes — saving time and material normally wasted in truing work up. In live mode it can also be used to support work held in a chuck. Made from precision-machined medium-tensile carbon steel for maximum structural strength. Thread: 1¼″ × 8TPI RH.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for all lathes with a 2MT tailstock.\u003c\/li\u003e\n\u003cli\u003eFits all NOVA insert-type chucks and all NOVA lathes.\u003c\/li\u003e\n\u003cli\u003e1¼″ × 8TPI RH thread.\u003c\/li\u003e\n\u003cli\u003ePrecision-machined medium-tensile carbon steel.\u003c\/li\u003e\n\u003cli\u003eQuick mounting.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826545295423,"sku":"LL-5016","price":44.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/5016.jpg?v=1788564456"},{"product_id":"nova-6001-face-plate-ring","title":"NOVA 6001 Face Plate Ring (fits 100mm jaws, 5\" outside diameter)","description":"\u003ch3\u003eThe NOVA 6001 Face Plate Ring:\u003c\/h3\u003e\n\u003cp\u003eDesigned to expand the range and capacity of your standard NOVA chuck for specific projects and applications. It fits the NOVA JS100N 100mm (4″) Chuck Accessory Jaw Set to provide a strong, fast method for mounting bowl blanks — offering the secure hold of a faceplate with the quick convenience and power of a chuck. Provides a strong mount even on irregular or rough-cut surfaces, and is a better alternative to the Woodworm Screw for larger bowls. Made from high-tensile steel with screw hole positions.\u003c\/p\u003e\n\u003ch4\u003eWhat are faceplate rings, and why use them?\u003c\/h4\u003e\n\u003cp\u003eA faceplate ring is a steel collar that screws into a wood blank and features a beveled inside edge that can be gripped firmly with a set of scroll jaws. There are two advantages over a traditional faceplate that screws directly onto the lathe headstock threads.\u003c\/p\u003e\n\u003cp\u003eThe primary advantage is for turners who frequently work with green wood. The typical process is to rough out a green blank, let it fully dry, then re-mount for final shaping. Faceplate rings can be left in place on the workpiece until it is ready for final turning, ensuring easy, accurate, and secure remounting. High-production turners often keep a large stock of faceplate rings for this purpose.\u003c\/p\u003e\n\u003cp\u003eA secondary advantage is for lathes with non-standard headstock threads (other than 1″×8tpi or 1¼″×8tpi). Regular faceplates are generally not available in niche thread sizes, but all NOVA chucks are available in an insert version that can be fitted to any lathe. Faceplate rings use the versatility of chuck jaws to fit any lathe regardless of headstock thread.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826545688639,"sku":"LL-6001","price":41.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/6001.jpg?v=1788564471"},{"product_id":"nova-6002-face-plate-ring-fits-130mm-jaws","title":"NOVA 6002 Face Plate Ring (fits 130mm jaws)","description":"\u003ch3\u003eThe NOVA 6002 Face Plate Ring:\u003c\/h3\u003e\n\u003cp\u003e Designed to expand the range and capacity of your standard NOVA chuck for specific projects and applications. It fits the NOVA JS130N 130mm (5″) Jaw Set to provide a strong, fast method for mounting bowl blanks — offering the secure hold of a faceplate with the quick convenience and power of a chuck. Provides a strong mount even on irregular or rough-cut surfaces, and is a better alternative to the Woodworm Screw for larger bowls. Made from high-tensile steel with screw hole positions.\u003c\/p\u003e\n\u003ch4\u003eWhat are faceplate rings, and why use them?\u003c\/h4\u003e\n\u003cp\u003eA faceplate ring is a steel collar that screws into a wood blank and features a beveled inside edge that can be gripped firmly with a set of scroll jaws. There are two advantages over a traditional faceplate that screws directly onto the lathe headstock threads.\u003c\/p\u003e\n\u003cp\u003eThe primary advantage is for turners who frequently work with green wood. The typical process is to rough out a green blank, let it fully dry, then re-mount for final shaping. Faceplate rings can be left in place on the workpiece until it is ready for final turning, ensuring easy, accurate, and secure remounting. High-production turners often keep a large stock of faceplate rings for this purpose.\u003c\/p\u003e\n\u003cp\u003eA secondary advantage is for lathes with non-standard headstock threads (other than 1″×8tpi or 1¼″×8tpi). Regular faceplates are generally not available in niche thread sizes, but all NOVA chucks are available in an insert version that can be fitted to any lathe. Faceplate rings use the versatility of chuck jaws to fit any lathe regardless of headstock thread.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826545721407,"sku":"LL-6002","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/6002.jpg?v=1788564472"},{"product_id":"nova-9019-flexible-point-drive-center","title":"NOVA 9019  1\/2″ Flexible Point Drive Centre","description":"\u003cp\u003eThe NOVA 9019 1\/2″ Flexible Point Drive Centre is a clever design popular among spindle turners. The spring-loaded centre point allows you to set your workpiece in place — or remove it — with the lathe turning. Your workpiece spins when you increase tailstock pressure and the drive centre teeth bite into the wood.\u003c\/p\u003e\n\u003cp\u003eWith light pressure it will drive your work, but allow it to stop if you have a catch, minimizing damage to your workpiece. With increased pressure, it will power through even the heaviest cuts. Since its multiple teeth spread the pressure over a larger area, the Flexible Point drive centre is less likely to split your workpiece than a standard spur.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpring-loaded centre pin\u003c\/li\u003e\n\u003cli\u003eMade to fit into the jaws of a chuck\u003c\/li\u003e\n\u003cli\u003eEliminates the need to remove the chuck\u003c\/li\u003e\n\u003cli\u003eFits neatly with NOVA’s four-jaw chucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Nova\u003c\/h4\u003e\n\u003cp\u003eFor over four decades, since 1978, NOVA has been synonymous with cutting-edge advancements in woodturning. In 1988, we pioneered the industry with the world’s first 4-jaw self-centering chuck system, setting new standards for precision and versatility. This unmatched original design reflects our commitment to excellence, earning us Wood Magazine’s “Best Innovation of the Past 25 Years” award.\u003c\/p\u003e\n\u003cp\u003eWith one of the most extensive ranges of chucks and jaws, NOVA continues to lead the industry with a commitment to innovation. Experience NOVA’s unparalleled holding power, interchangeability, reliability, and value — backed by a 10-year warranty on chucks and jaws (excluding soft jaws). Our NOVA tools are expertly designed with woodturners, for woodturners. Your passion inspires our design.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826546343999,"sku":"LL-9019","price":59.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/9019-1.jpg?v=1788564489"},{"product_id":"nova-9020-flexible-point-drive-center","title":"NOVA 9020 7\/8″ Flexible Point Drive Centre","description":"\u003cp\u003eThe NOVA 9020 7\/8″ Flexible Point Drive Centre is a clever design popular among spindle turners. The spring-loaded centre point allows you to set your workpiece in place — or remove it — with the lathe turning. Your workpiece spins when you increase tailstock pressure and the drive centre teeth bite into the wood.\u003c\/p\u003e\n\u003cp\u003eWith light pressure it will drive your work, but allow it to stop if you have a catch, minimizing damage to your workpiece. With increased pressure, it will power through even the heaviest cuts. Since its multiple teeth spread the pressure over a larger area, the Flexible Point drive centre is less likely to split your workpiece than a standard spur.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpring-loaded centre pin\u003c\/li\u003e\n\u003cli\u003eMade to fit into the jaws of a chuck\u003c\/li\u003e\n\u003cli\u003eEliminates the need to remove the chuck\u003c\/li\u003e\n\u003cli\u003eFits neatly with NOVA’s four-jaw chucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Nova\u003c\/h4\u003e\n\u003cp\u003eFor over four decades, since 1978, NOVA has been synonymous with cutting-edge advancements in woodturning. In 1988, we pioneered the industry with the world’s first 4-jaw self-centering chuck system, setting new standards for precision and versatility. This unmatched original design reflects our commitment to excellence, earning us Wood Magazine’s “Best Innovation of the Past 25 Years” award.\u003c\/p\u003e\n\u003cp\u003eWith one of the most extensive ranges of chucks and jaws, NOVA continues to lead the industry with a commitment to innovation. Experience NOVA’s unparalleled holding power, interchangeability, reliability, and value — backed by a 10-year warranty on chucks and jaws (excluding soft jaws). Our NOVA tools are expertly designed with woodturners, for woodturners. Your passion inspires our design.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826546376767,"sku":"LL-9020","price":59.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/9020-1.jpg?v=1788564490"},{"product_id":"nova-9021-flexible-point-drive-center","title":"NOVA 9021 1-1\/4″ Flexible Point Drive Centre","description":"\u003cp\u003eThe NOVA 9021 1-1\/4″ Flexible Point Drive Centre is a clever design popular among spindle turners. The spring-loaded centre point allows you to set your workpiece in place — or remove it — with the lathe turning. Your workpiece spins when you increase tailstock pressure and the drive centre teeth bite into the wood.\u003c\/p\u003e\n\u003cp\u003eWith light pressure it will drive your work, but allow it to stop if you have a catch, minimizing damage to your workpiece. With increased pressure, it will power through even the heaviest cuts. Since its multiple teeth spread the pressure over a larger area, the Flexible Point drive centre is less likely to split your workpiece than a standard spur.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpring-loaded centre pin\u003c\/li\u003e\n\u003cli\u003eMade to fit into the jaws of a chuck\u003c\/li\u003e\n\u003cli\u003eEliminates the need to remove the chuck\u003c\/li\u003e\n\u003cli\u003eFits neatly with NOVA’s four-jaw chucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Nova\u003c\/h4\u003e\n\u003cp\u003eFor over four decades, since 1978, NOVA has been synonymous with cutting-edge advancements in woodturning. In 1988, we pioneered the industry with the world’s first 4-jaw self-centering chuck system, setting new standards for precision and versatility. This unmatched original design reflects our commitment to excellence, earning us Wood Magazine’s “Best Innovation of the Past 25 Years” award.\u003c\/p\u003e\n\u003cp\u003eWith one of the most extensive ranges of chucks and jaws, NOVA continues to lead the industry with a commitment to innovation. Experience NOVA’s unparalleled holding power, interchangeability, reliability, and value — backed by a 10-year warranty on chucks and jaws (excluding soft jaws). Our NOVA tools are expertly designed with woodturners, for woodturners. Your passion inspires our design.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826546409535,"sku":"LL-9021","price":69.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/9021-2.jpg?v=1788564492"},{"product_id":"nova-9083-adapter","title":"NOVA 9083 Adapter","description":"\u003cp\u003eThe NOVA 9083 Adapter is compatible with NOVA chucks and threaded accessories. It adapts lathe spindle tooling to another lathe with a different threaded spindle, allowing your chucks and faceplates to be interchangeable between lathes with different spindle sizes. Threading on this product is M33 x 3.5 female to 1¼″ x 8TPI male.\u003c\/p\u003e\n\u003ch4\u003eNOVA Spindle Adaptor Options\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e9083 – M33 x 3.5 female to 1¼″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9084 – M33 x 3.5 female to 1″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9085 – 1¼″ x 8TPI female to 1″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9086 – 1″ x 8TPI female to 1¼″ x 8TPI male\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout NOVA Spindle Adaptors\u003c\/h4\u003e\n\u003cp\u003eProvides solutions for those moving from larger to smaller lathe threads and vice versa. These adaptors allow you to share your favourite tooling between multiple lathes without the expense of duplicating tooling.\u003c\/p\u003e\n\u003ch4\u003eImportant Note\u003c\/h4\u003e\n\u003cp\u003eAs this adaptor is used to create a lathe spindle size that will hold a variety of accessories, run-out and performance may vary depending on what accessories are being used. NOVA cannot guarantee run-out or performance of accessories while using this thread adaptor. These specialized thread adaptors also carry a different warranty from standard NOVA chucks and chuck inserts\/adaptors.\u003c\/p\u003e\n\u003ch4\u003eMounting the Spindle Adaptor\u003c\/h4\u003e\n\u003cp\u003eThe spindle adaptor needs to be located and screwed onto the lathe spindle. Use the nylon washer provided to allow for a tight, solid fit against the lathe spindle — this makes the adaptor easier to remove when finished. Ensure both surfaces of the threaded adaptor are located against the flat of the lathe spindle and that it is tightly seated in the accessory used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Ensure the set screw is tightly secured against the lathe spindle for proper locking.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826546475071,"sku":"LL-9083","price":48.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/9084-1.jpg?v=1788564494"},{"product_id":"nova-9084-adapter","title":"NOVA 9084 Adapter","description":"\u003cp\u003eThe NOVA 9084 Adapter is compatible with NOVA chucks and threaded accessories. It adapts lathe spindle tooling to another lathe with a different threaded spindle, allowing your chucks and faceplates to be interchangeable between lathes with different spindle sizes. Threading on this product is M33 x 3.5 female to 1″ x 8TPI male.\u003c\/p\u003e\n\u003ch4\u003eNOVA Spindle Adaptor Options\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e9083 – M33 x 3.5 female to 1¼″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9084 – M33 x 3.5 female to 1″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9085 – 1¼″ x 8TPI female to 1″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9086 – 1″ x 8TPI female to 1¼″ x 8TPI male\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout NOVA Spindle Adaptors\u003c\/h4\u003e\n\u003cp\u003eProvides solutions for those moving from larger to smaller lathe threads and vice versa. These adaptors allow you to share your favourite tooling between multiple lathes without the expense of duplicating tooling.\u003c\/p\u003e\n\u003ch4\u003eImportant Note\u003c\/h4\u003e\n\u003cp\u003eAs this adaptor is used to create a lathe spindle size that will hold a variety of accessories, run-out and performance may vary depending on what accessories are being used. NOVA cannot guarantee run-out or performance of accessories while using this thread adaptor. These specialized thread adaptors also carry a different warranty from standard NOVA chucks and chuck inserts\/adaptors.\u003c\/p\u003e\n\u003ch4\u003eMounting the Spindle Adaptor\u003c\/h4\u003e\n\u003cp\u003eThe spindle adaptor needs to be located and screwed onto the lathe spindle. Use the nylon washer provided to allow for a tight, solid fit against the lathe spindle — this makes the adaptor easier to remove when finished. Ensure both surfaces of the threaded adaptor are located against the flat of the lathe spindle and that it is tightly seated in the accessory used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Ensure the set screw is tightly secured against the lathe spindle for proper locking.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826546540607,"sku":"LL-9084","price":48.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/9084.jpg?v=1788564495"},{"product_id":"nova-9085-adapter","title":"NOVA 9085 Adapter","description":"\u003cp\u003eThe NOVA 9085 Adapter is compatible with NOVA chucks and threaded accessories. It adapts lathe spindle tooling to another lathe with a different threaded spindle, allowing your chucks and faceplates to be interchangeable between lathes with different spindle sizes. Threading on this product is 1¼″ x 8TPI female to 1″ x 8TPI male.\u003c\/p\u003e\n\u003ch4\u003eNOVA Spindle Adaptor Options\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e9083 – M33 x 3.5 female to 1¼″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9084 – M33 x 3.5 female to 1″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9085 – 1¼″ x 8TPI female to 1″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9086 – 1″ x 8TPI female to 1¼″ x 8TPI male\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout NOVA Spindle Adaptors\u003c\/h4\u003e\n\u003cp\u003eProvides solutions for those moving from larger to smaller lathe threads and vice versa. These adaptors allow you to share your favourite tooling between multiple lathes without the expense of duplicating tooling.\u003c\/p\u003e\n\u003ch4\u003eImportant Note\u003c\/h4\u003e\n\u003cp\u003eAs this adaptor is used to create a lathe spindle size that will hold a variety of accessories, run-out and performance may vary depending on what accessories are being used. NOVA cannot guarantee run-out or performance of accessories while using this thread adaptor. These specialized thread adaptors also carry a different warranty from standard NOVA chucks and chuck inserts\/adaptors.\u003c\/p\u003e\n\u003ch4\u003eMounting the Spindle Adaptor\u003c\/h4\u003e\n\u003cp\u003eThe spindle adaptor needs to be located and screwed onto the lathe spindle. Use the nylon washer provided to allow for a tight, solid fit against the lathe spindle — this makes the adaptor easier to remove when finished. Ensure both surfaces of the threaded adaptor are located against the flat of the lathe spindle and that it is tightly seated in the accessory used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Ensure the set screw is tightly secured against the lathe spindle for proper locking.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826546573375,"sku":"LL-9085","price":48.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/9085.jpg?v=1788564497"},{"product_id":"nova-9086-adapter","title":"NOVA 9086 Adapter","description":"\u003cp\u003eThe NOVA 9086 Adapter is compatible with NOVA chucks and threaded accessories. It adapts lathe spindle tooling to another lathe with a different threaded spindle, allowing your chucks and faceplates to be interchangeable between lathes with different spindle sizes. Threading on this product is 1″ x 8TPI female to 1¼″ x 8TPI male.\u003c\/p\u003e\n\u003ch4\u003eNOVA Spindle Adaptor Options\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e9083 – M33 x 3.5 female to 1¼″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9084 – M33 x 3.5 female to 1″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9085 – 1¼″ x 8TPI female to 1″ x 8TPI male\u003c\/li\u003e\n\u003cli\u003e9086 – 1″ x 8TPI female to 1¼″ x 8TPI male\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout NOVA Spindle Adaptors\u003c\/h4\u003e\n\u003cp\u003eProvides solutions for those moving from larger to smaller lathe threads and vice versa. These adaptors allow you to share your favourite tooling between multiple lathes without the expense of duplicating tooling.\u003c\/p\u003e\n\u003ch4\u003eImportant Note\u003c\/h4\u003e\n\u003cp\u003eAs this adaptor is used to create a lathe spindle size that will hold a variety of accessories, run-out and performance may vary depending on what accessories are being used. NOVA cannot guarantee run-out or performance of accessories while using this thread adaptor. These specialized thread adaptors also carry a different warranty from standard NOVA chucks and chuck inserts\/adaptors.\u003c\/p\u003e\n\u003ch4\u003eMounting the Spindle Adaptor\u003c\/h4\u003e\n\u003cp\u003eThe spindle adaptor needs to be located and screwed onto the lathe spindle. Use the nylon washer provided to allow for a tight, solid fit against the lathe spindle — this makes the adaptor easier to remove when finished. Ensure both surfaces of the threaded adaptor are located against the flat of the lathe spindle and that it is tightly seated in the accessory used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Ensure the set screw is tightly secured against the lathe spindle for proper locking.\u003c\/p\u003e","brand":"Nova","offers":[{"title":"Default Title","offer_id":43826546606143,"sku":"LL-9086","price":36.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/9086.jpg?v=1788564498"},{"product_id":"rbb-centering-genie","title":"Ron Brown's Best Centering Genie","description":"\u003ch1\u003eRon Brown's Best Centering Genie\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eTired of Wobbly Remounts? Introducing the Ron Brown's Best Centering Genie.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou've painstakingly shaped your masterpiece, only to face the frustrating wobble of a misaligned remount. Say goodbye to wasted time and uneven cuts! The revolutionary Centering Genie uses precision dual ball bearings to effortlessly and accurately re-center your spindles, vases, and bowls after chuck removal. Built for a lifetime of use and featuring two sets of bearings for various sizes, the lightweight and easy-to-use Centering Genie will have your projects running true in seconds. Reclaim your time and perfect your craft.\u003c\/p\u003e\n\u003cp\u003eOrder your Centering Genie today and turn with confidence!\u003c\/p\u003e\n\u003ch4\u003eCheck Out Our Other Ron Brown's Best Products:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca style=\"color: #008000;\" href=\"https:\/\/woodworkerspecialties.com\/product\/rbb-8-quad-jig\/\"\u003e8\" Quad Jig\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca style=\"color: #008000;\" href=\"https:\/\/woodworkerspecialties.com\/product\/rbb-4040-grind-set-up-block-with-riser\/\"\u003e4040 Grind Setup Block\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca style=\"color: #008000;\" href=\"https:\/\/woodworkerspecialties.com\/product\/rbb-turners-angle-gauge\/\"\u003eAngle Finder Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca style=\"color: #008000;\" href=\"https:\/\/woodworkerspecialties.com\/product\/rbb-natural-edge-jamb-chuck\/\"\u003eLive Edge Jamb Chuck\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca style=\"color: #008000;\" href=\"https:\/\/woodworkerspecialties.com\/product\/rbb-universal-setting-jig\/\"\u003eUniversal Setting Jig\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ron Brown’s Best","offers":[{"title":"Default Title","offer_id":43848072626239,"sku":"RBB-CENTERING","price":54.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/centering-genie.jpg?v=1789167741"},{"product_id":"rgwood-cbn-wheel-lathe-adapter","title":"RGWOOD CBN \u0026 Polishing Wheel Lathe Mandrel","description":"\u003csection class=\"wd-negative-gap elementor-section elementor-top-section elementor-element elementor-element-c185ff7 elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"c185ff7\" data-element_type=\"section\" data-e-type=\"section\"\u003e\n\u003cdiv class=\"elementor-container elementor-column-gap-default\"\u003e\n\u003cdiv class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-d300cc9\" data-id=\"d300cc9\" data-element_type=\"column\" data-e-type=\"column\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv class=\"elementor-element elementor-element-db2266a wd-width-100 elementor-widget elementor-widget-wd_title\" data-id=\"db2266a\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings='{\"highlighted_vertical_offset\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]},\"highlighted_vertical_offset_tablet\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]},\"highlighted_vertical_offset_mobile\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]}}' data-widget_type=\"wd_title.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"title-wrapper wd-set-mb reset-last-child wd-title-color-default wd-title-style-default wd-title-size-default text-center\"\u003e\n\u003cdiv class=\"liner-continer\"\u003e\n\u003ch4 class=\"woodmart-title-container title wd-fontsize-l\"\u003eRGWOOD CBN Wheel Lathe Adapter\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wd-negative-gap elementor-section elementor-top-section elementor-element elementor-element-ca438df elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"ca438df\" data-element_type=\"section\" data-e-type=\"section\"\u003e\n\u003cdiv class=\"elementor-container elementor-column-gap-default\"\u003e\n\u003cdiv class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-59d0bad\" data-id=\"59d0bad\" data-element_type=\"column\" data-e-type=\"column\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv class=\"elementor-element elementor-element-94a9ad7 elementor-widget elementor-widget-wd_text_block\" data-id=\"94a9ad7\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings='{\"highlighted_vertical_offset\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]},\"highlighted_vertical_offset_tablet\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]},\"highlighted_vertical_offset_mobile\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]}}' data-widget_type=\"wd_text_block.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"wd-text-block reset-last-child text-left\"\u003e\n\u003cp\u003eThe RGWOOD CBN \u0026amp; Polishing Wheel Lathe Adapter allows you to mount your\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product-category\/sharpening-2\/cbn-grinding-wheels\/\"\u003e\u003cspan\u003eCBN sharpening wheels\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand polishing mpos onto your lathe shaft for SLOW speed grinding, and also accepts standard 5\/8\" center polishing mops for polishing Time to sharpen those well used and well loved\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product-category\/wood-turning\/rgwood-m42-hss-cryogenic-turning-tools\/\"\u003e\u003cspan\u003eturning too\u003c\/span\u003els\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eof yours! (\u003ca href=\"https:\/\/woodworkerspecialties.com\/product-category\/sharpening-2\/cbn-grinding-wheels\/\"\u003e\u003cspan\u003eSharpening wheels sold seperately\u003c\/span\u003e\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eAdapters are available to mount to\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e1-1\/4\" x 8tpi\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eand\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e1\" x 8tpi\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003elathe shafts,\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eand 5\/8\" for stacking\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(this one attaches to the end of another if you want to mount 2 wheels).\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003ePlease be sure to check the size of your lathe shaft and select the correctly sized adapter accordingly. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e5\/8\" shaft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon the adapter accepts most generic CBN wheels and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eALL RGWOOD\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product-category\/sharpening-2\/cbn-grinding-wheels\/\"\u003e\u003cspan\u003eCBN wheels\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wd-negative-gap elementor-section elementor-top-section elementor-element elementor-element-55161447 elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"55161447\" data-element_type=\"section\" data-e-type=\"section\"\u003e\n\u003cdiv class=\"elementor-container elementor-column-gap-default\"\u003e\n\u003cdiv class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-34ef7ff6\" data-id=\"34ef7ff6\" data-element_type=\"column\" data-e-type=\"column\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv class=\"elementor-element elementor-element-7a96b962 color-scheme-inherit text-left elementor-widget elementor-widget-text-editor\" data-id=\"7a96b962\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003ch2\u003e\u003cspan\u003eHow to Use:\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMake sure your lathe is powered off.\u003c\/li\u003e\n\u003cli\u003eSecurely mount your CBN wheel\/lathe adapter to your lathe.\u003c\/li\u003e\n\u003cli\u003eMount the\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product-category\/sharpening-2\/cbn-grinding-wheels\/\"\u003eCBN wheel\u003c\/a\u003e \u003c\/span\u003eitself to the adapter.\u003c\/li\u003e\n\u003cli\u003eAdjust your tailstock live center to the end of the mandrel: the end of the mandrel is designed to accept your tailstock live center for support.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eDo not skip this step!\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePut on your safety glasses and other safety gear.\u003c\/li\u003e\n\u003cli\u003eTurn on your lathe to SLOW speed and carefully begin sharpening your\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product-category\/wood-turning\/rgwood-m42-hss-cryogenic-turning-tools\/\"\u003eturning tools\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eYou can either use your tool rest as a support post, or you can mount your sharpening jigs to the lathe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– KEEP YOUR LATHE SPEED BELOW 2000 RPM.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAdditional Information:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eSo your lathe shaft isn’t the right size for the two adapter options we sell. What now?? Problem solved: we also sell adapters which will allow you to mount the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1″ x 8tpi\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eCBN Wheel Lathe Adapter to\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-adapter-for-lathe-chucks-faceplates-from-m33-x-3-5-spindle-to-1-x-8tpi\/\"\u003eM33\u003c\/a\u003e\u003c\/span\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-adapter-for-lathe-chucks-faceplates-from-7-8-x-14tpi-beaver-rockwell-to-1-x-8tpi-chuck-faceplate\/\"\u003e7\/8″ x 14tpi\u003c\/a\u003e\u003c\/span\u003e,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-adapter-for-lathe-chucks-faceplates-from-3-4-x-16tpi-spindle-to-1-x-8tpi-accessory\/\"\u003e\u003cspan\u003e3\/4″ x 16tpi\u003c\/span\u003e\u003c\/a\u003e, and\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-adapter-for-lathe-chucks-faceplates-from-5-8-plainbore-spindle-to-1-x-8tpi-accessory\/\"\u003e\u003cspan\u003e5\/8″ Plainbore (Shopsmith)\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003elathes! If you need help figuring out which adapters you need to make this work, don’t hesitate to get in touch via our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/contact-info\/\"\u003e\u003cspan\u003eContact Us page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eHappy sharpening!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"RGWOOD","offers":[{"title":"Threaded 1\" x 8tpi","offer_id":43877128175679,"sku":"RGW-AGW100","price":32.95,"currency_code":"CAD","in_stock":true},{"title":"Threaded 1-1\/4\" x 8tpi","offer_id":43877128208447,"sku":"RGW-AGW125","price":32.95,"currency_code":"CAD","in_stock":true},{"title":"Extender\/Stacker (add-on)","offer_id":44194345615423,"sku":"RGW-AGW58","price":32.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-AGW25_grinding_wheel_mount_adapter_1.jpg?v=1792621345"},{"product_id":"steel-cbn-grinding-wheel","title":"RGWOOD CBN Grinding Wheel","description":"\u003ch1\u003eRGWOOD CBN Grinding Wheel with 5\/8″ Arbor with 1\/2″ Sleeve\u003c\/h1\u003e\n\u003cp\u003eCBN Grinding Wheels are the premium wheel for sharpening tool steel (turning tools, chisels, plane irons, etc). DO NOT use for regular steel or aluminum.  These wheels last a lifetime, never lose their shape like a vitrified wheel, and the wide flat surface makes sharpening much easier, especially when working with a jig.\u003c\/p\u003e\n\u003ch4\u003eSizes Available:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e8″ | 320 Grit | 1.5″ Wide\u003c\/li\u003e\n\u003cli\u003e8″ | 180 Grit | 1.5″ Wide\u003c\/li\u003e\n\u003cli\u003e8″ | 80 Grit | 1.5″ Wide\u003c\/li\u003e\n\u003cli\u003e6″ | 180 Grit | 1″ Wide\u003c\/li\u003e\n\u003cli\u003e6″ | 80 Grit | 1″ Wide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes on the 8″ CBN Grinding Wheels:\u003c\/h4\u003e\n\u003cp\u003eThe 8″ wheels are 1-9\/16″ wide, with squared-off corners. The 3\/8″ wheel rim is coated, providing an ideal flat surface for sharpening drill bits and similar tasks. They are bored at 5\/8″ and also come with a 1\/2″ adapter sleeve for grinders with a 1\/2″ shaft. These wheels are made of steel and are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eheavy\u003c\/strong\u003e, weighing approximately 8 pounds each. A 3\/4 – 1 HP, 1800 RPM grinder is recommended for use. If using a grinder with less horsepower, the wheels can still be used, but you may need to give them a flick with your hand to get them started. Additionally, these wheels are well-made and have been tested for balance. Any necessary adjustments for balancing have already been made, which may be indicated by a small hole on one side.\u003c\/p\u003e\n\u003ch4\u003eNotes on the 6″ CBN Grinding Wheels:\u003c\/h4\u003e\n\u003cp\u003eThe corners on the 6″ CBN Grinding Wheels are also squared off, and the 9\/16″ wheel rim is coated, providing an ideal flat surface for sharpening drill bits and similar tools. They are bored at 5\/8″ and also come with a 1\/2″ adapter sleeve for grinders with a 1\/2″ shaft. Made of steel, these wheels are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eheavy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand should be used on an 1800 RPM grinder. If using a grinder with less horsepower, the wheels can still be used, but you may need to give them a flick with your hand to get them started. Additionally, these wheels are well-made and have been tested for balance. Any necessary adjustments for balancing have already been made, which may be indicated by a small hole on one side.\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"6\" \/ 80","offer_id":43877128273983,"sku":"RGW-CBN6080","price":99.95,"currency_code":"CAD","in_stock":true},{"title":"6\" \/ 180","offer_id":43877128306751,"sku":"RGW-CBN6180","price":99.95,"currency_code":"CAD","in_stock":true},{"title":"8\" \/ 80","offer_id":43877128339519,"sku":"RGW-CBN8080","price":169.95,"currency_code":"CAD","in_stock":true},{"title":"8\" \/ 180","offer_id":43877128372287,"sku":"RGW-CBN8180","price":169.95,"currency_code":"CAD","in_stock":true},{"title":"8\" \/ 320","offer_id":43877128405055,"sku":"RGW-CBN8320","price":169.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-CBN8320_grinding_wheel_8_inch_320_grit_5.jpg?v=1792621059"},{"product_id":"rgwood-lathe-spindle-extenders","title":"RGWOOD Lathe Spindle Extenders","description":"\u003csection class=\"wd-negative-gap elementor-section elementor-top-section elementor-element elementor-element-41d7e2ff elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"41d7e2ff\" data-element_type=\"section\" data-e-type=\"section\"\u003e\n\u003cdiv class=\"elementor-container elementor-column-gap-default\"\u003e\n\u003cdiv class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-41eaaca0\" data-id=\"41eaaca0\" data-element_type=\"column\" data-e-type=\"column\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv class=\"elementor-element elementor-element-3e1e3ce5 color-scheme-inherit text-left elementor-widget elementor-widget-text-editor\" data-id=\"3e1e3ce5\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003ch1\u003e\u003cspan\u003eRGWOOD Lathe Spindle Extenders\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan class=\"notion-enable-hover\" data-token-index=\"0\"\u003eThese\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eRGWOOD Lathe Spindle Extenders\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eare the perfect solution for lengthening your lathe spindle when you need to work further back on your turning project. Add one of these to your lathe to move your chuck or faceplate an additional 3” away from your headstock, allowing more space to get into those more awkward angles.  Additionally, the #2MT center allows for compatibility with our RGWOOD #2MT\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-drive-spur-with-spring-center-2mt-copy\/\"\u003e5\/8″ drive spurs\u003c\/a\u003e\u003c\/span\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-drive-spur-with-spring-center-2mt\/\"\u003e1″ drive spurs\u003c\/a\u003e\u003c\/span\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-pen-turning-bundle-2mt\/\"\u003epen mandrels\u003c\/a\u003e\u003c\/span\u003e, etc. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wd-negative-gap elementor-section elementor-top-section elementor-element elementor-element-eb5a34d elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"eb5a34d\" data-element_type=\"section\" data-e-type=\"section\"\u003e\n\u003cdiv class=\"elementor-container elementor-column-gap-default\"\u003e\n\u003cdiv class=\"elementor-column elementor-col-50 elementor-top-column elementor-element elementor-element-c0b4425\" data-id=\"c0b4425\" data-element_type=\"column\" data-e-type=\"column\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv class=\"elementor-element elementor-element-e80127d elementor-widget elementor-widget-wd_text_block\" data-id=\"e80127d\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings='{\"highlighted_vertical_offset\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]},\"highlighted_vertical_offset_tablet\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]},\"highlighted_vertical_offset_mobile\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]}}' data-widget_type=\"wd_text_block.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"wd-text-block reset-last-child text-left\"\u003e\n\u003ch4\u003e\u003cspan\u003eAvailable Sizes\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003eBe sure to \u003cb\u003eselect the correct extender\u003c\/b\u003e to fit the spindle on your lathe. Sizes available are:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1\" x 8tpi\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1-1\/4\" x 8tpi\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eM33 x 3.5\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAdapters are available to fit your \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-adapter-for-lathe-chucks-faceplates-from-3-4-x-16tpi-spindle-to-1-x-8tpi-accessory\/\"\u003e3\/4\" x 16tpi\u003c\/a\u003e, \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-adapter-for-lathe-chucks-faceplates-from-7-8-x-14tpi-beaver-rockwell-to-1-x-8tpi-chuck-faceplate\/\"\u003e7\/8\" x 14tpi\u003c\/a\u003e, and \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-adapter-for-5-8-plainbore-spindle-to-1-x-8tpi-accessory\/\"\u003e5\/8\" (shopsmith)\u003c\/a\u003e spindles to the \u003cb\u003e1\" x 8tpi\u003c\/b\u003e extender.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-column elementor-col-50 elementor-top-column elementor-element elementor-element-455b417\" data-id=\"455b417\" data-element_type=\"column\" data-e-type=\"column\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv class=\"elementor-element elementor-element-7c7a003 elementor-widget elementor-widget-wd_image_or_svg\" data-id=\"7c7a003\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"wd_image_or_svg.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"wd-image text-left\"\u003e\u003cimg data-lazyloaded=\"1\" src=\"https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657.webp\" decoding=\"async\" width=\"1200\" height=\"616\" data-src=\"https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657.webp\" class=\"attachment-full size-full entered litespeed-loaded\" alt=\"\" data-srcset=\"https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657.webp 1200w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657-400x205.webp 400w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657-768x394.webp 768w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657-430x221.webp 430w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657-700x359.webp 700w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657-150x77.webp 150w\" data-sizes=\"(max-width: 1200px) 100vw, 1200px\" data-ll-status=\"loaded\" sizes=\"(max-width: 1200px) 100vw, 1200px\" srcset=\"https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657.webp 1200w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657-400x205.webp 400w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657-768x394.webp 768w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657-430x221.webp 430w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657-700x359.webp 700w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2024\/11\/RGW-EXTS_lathe_spindle_extenders-1-e1773865863657-150x77.webp 150w\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wd-negative-gap elementor-section elementor-top-section elementor-element elementor-element-1e2f72f elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"1e2f72f\" data-element_type=\"section\" data-e-type=\"section\"\u003e\n\u003cdiv class=\"elementor-container elementor-column-gap-default\"\u003e\n\u003cdiv class=\"elementor-column elementor-col-50 elementor-top-column elementor-element elementor-element-0615bcc\" data-id=\"0615bcc\" data-element_type=\"column\" data-e-type=\"column\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv class=\"elementor-element elementor-element-1625546 elementor-widget elementor-widget-wd_image_or_svg\" data-id=\"1625546\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"wd_image_or_svg.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"wd-image text-left\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-column elementor-col-50 elementor-top-column elementor-element elementor-element-daca016\" data-id=\"daca016\" data-element_type=\"column\" data-e-type=\"column\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv class=\"elementor-element elementor-element-04b1dab elementor-widget elementor-widget-wd_text_block\" data-id=\"04b1dab\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings='{\"highlighted_vertical_offset\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]},\"highlighted_vertical_offset_tablet\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]},\"highlighted_vertical_offset_mobile\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]}}' data-widget_type=\"wd_text_block.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"wd-text-block reset-last-child text-left\"\u003e\n\u003ch4\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eExtends your lathe spindle by 3 inches, for easier maneuverability around your work\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFlats on the extenders accept a \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates\/\"\u003e42mm wrench\u003c\/a\u003e for easy removal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLocking set screws allow for secure mounting to your lathe spindle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e#2MT center allows compatibility with \u003cspan class=\"notion-enable-hover\" data-token-index=\"0\"\u003eRGWOOD #2MT \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-drive-spur-with-spring-center-2mt-copy\/\"\u003e5\/8\" drive spurs\u003c\/a\u003e, \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-drive-spur-with-spring-center-2mt\/\"\u003e1\" drive spurs\u003c\/a\u003e, \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-pen-turning-bundle-2mt\/\"\u003epen mandrels\u003c\/a\u003e, etc. \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeavy duty steel manufacturing allows for excellent stability and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wd-negative-gap elementor-section elementor-top-section elementor-element elementor-element-56a8579 elementor-section-boxed elementor-section-height-default elementor-section-height-default\" data-id=\"56a8579\" data-element_type=\"section\" data-e-type=\"section\"\u003e\n\u003cdiv class=\"elementor-container elementor-column-gap-default\"\u003e\n\u003cdiv class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-15e9872\" data-id=\"15e9872\" data-element_type=\"column\" data-e-type=\"column\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv class=\"elementor-element elementor-element-44bf6a7 elementor-widget elementor-widget-wd_text_block\" data-id=\"44bf6a7\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings='{\"highlighted_vertical_offset\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]},\"highlighted_vertical_offset_tablet\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]},\"highlighted_vertical_offset_mobile\":{\"unit\":\"px\",\"size\":\"\",\"sizes\":[]}}' data-widget_type=\"wd_text_block.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"wd-text-block reset-last-child text-left\"\u003e\n\u003cp\u003e\u003cspan class=\"notion-enable-hover\" data-token-index=\"0\"\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethat these extenders are\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e4\u003c\/b\u003e\u003cstrong\u003e\" in total length\u003c\/strong\u003e, but this is including the thread section that your accessory will be mounted to. Once threaded onto your spindle and accessories, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eextension is 3\u003c\/strong\u003e\".\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"RGWOOD","offers":[{"title":"1\" x 8tpi","offer_id":43877128470591,"sku":"RGW-EXTS100","price":32.95,"currency_code":"CAD","in_stock":true},{"title":"1-1\/4\" x 8tpi","offer_id":43877128503359,"sku":"RGW-EXTS114","price":32.95,"currency_code":"CAD","in_stock":true},{"title":"M33 x 3.5","offer_id":43877128536127,"sku":"RGW-EXTSM33","price":32.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-EXTS_lathe_spindle_extenders.webp?v=1792620667"},{"product_id":"rgwood-5-8-multipoint-chuck-drive-spur-with-spring-center","title":"RGWOOD 5\/8\" Multipoint Chuck Drive Spur with Spring Center","description":"\u003ch1 style=\"text-align: center;\"\u003eRGWOOD 5\/8\" Multipoint Chuck Drive Spur with Spring Center\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eThis \u003cb\u003eRGWOOD 5\/8\" Multipoint Chuck Drive Spur with Spring Center\u003c\/b\u003e will mount in most wood lathe chucks for an easy switch to spindle turning. The multiple points on these spurs provide superior holding power, while causing minimal marking on the work piece compared to other spur centers - on the bottom of a chair leg, for example, it leaves only a circle of tiny holes with another small hole in the center. In addition, the spring loaded center makes this chuck spur easy to align and mount.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWhat is a chuck spur?\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003eA lathe chuck spur, also called a \"chuck center\" or \"drive center,\" is a small, pointed piece that fits into the jaws of your woodlathe chuck, securely holding your work piece in preparation for turning. This is ideal particularly for spindle turning, and works by providing a central point of contact for the tailstock live center to push against. To use it a chuck spur, simply insert the spur into the chuck jaws, tighten the chuck, align the work-piece's center with the spur, and then engage the tailstock live center to push against the workpiece and keep it stable while turning.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eKey steps to using a lathe chuck spur:\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSelect the right size:\u003c\/b\u003e Choose a chuck spur that fits snugly within the jaws of your lathe chuck.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eMount the spur:\u003c\/b\u003e Place the spur into the chuck jaws and tighten the chuck firmly.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eCenter the workpiece:\u003c\/b\u003e Align the tip of the spur with the center of your workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eEngage the tailstock:\u003c\/b\u003e Carefully slide the tailstock live center into contact with the center of the other end of your project, applying gentle pressure to secure the workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eStart turning:\u003c\/b\u003e Once the workpiece is securely held, begin turning on the lathe at a suitable speed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eImportant points to remember:\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eDrilling a pilot hole:\u003c\/b\u003e \\nFor better stability, you may need to drill a small pilot hole in the center of your workpiece to accommodate the chuck spur.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSafety first:\u003c\/b\u003e \\nAlways ensure the chuck is properly tightened and the tailstock is aligned correctly before starting the lathe.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5 style=\"text-align: center;\"\u003eLooking for a different size or taper? We likely carry it! Check out the links below.\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eRGWOOD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eChuck Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-chuck-drive-spur-with-spring-center\/\"\u003eRGWOOD 1″ Multipoint Chuck Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-chuck-drive-spur-with-spring-center\/\"\u003eRGWOOD 5\/8″ Multipoint Chuck Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e1MT Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-drive-spur-with-spring-center-2mt\/\"\u003eRGWOOD 1MT 1″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-woodlathe-drive-drive-spur-1mt-copy\/\"\u003eRGWOOD 1MT Drive Spur\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e2MT Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-drive-spur-with-spring-center-2mt\/\"\u003eRGWOOD 2MT 1″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-2mt-5-8-inch-multipoint-drive-spur-with-spring-center\/\"\u003eRGWOOD 2MT 5\/8″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eNOVA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eNOVA NCSC Chuck Spur Centre\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9021-1-1-4%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9021 1-1\/4″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9019-1-2%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9019 1\/2″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9020-7-8%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9020 7\/8″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877128568895,"sku":"RGW-F6100","price":24.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-F6100_multipoint_chuck_drive_spur_spring_center_5_8_inch_1.webp?v=1792620610"},{"product_id":"rgwood-1-multipoint-chuck-drive-spur-with-spring-center","title":"RGWOOD 1\" Multipoint Chuck Drive Spur with Spring Center","description":"\u003ch1 style=\"text-align: center;\"\u003e\u003cstrong\u003eRGWOOD 1″ Multipoint Chuck Drive Spur with Spring Center\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eThis \u003cb\u003eRGWOOD 1\" Multipoint Chuck Drive Spur with Spring Center\u003c\/b\u003e will mount in most wood lathe chucks for an easy switch to spindle turning. The multiple points on these spurs provide superior holding power, while causing minimal marking on the work piece compared to other spur centers - on the bottom of a chair leg, for example, it leaves only a circle of tiny holes with another small hole in the center. In addition, the spring loaded center makes this chuck spur easy to align and mount.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWhat is a chuck spur?\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003eA lathe chuck spur, also called a \"chuck center\" or \"drive center,\" is a small, pointed piece that fits into the jaws of your woodlathe chuck, securely holding your work piece in preparation for turning. This is ideal particularly for spindle turning, and works by providing a central point of contact for the tailstock live center to push against. To use it a chuck spur, simply insert the spur into the chuck jaws, tighten the chuck, align the work-piece's center with the spur, and then engage the tailstock live center to push against the workpiece and keep it stable while turning.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eKey steps to using a lathe chuck spur:\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSelect the right size:\u003c\/b\u003e Choose a chuck spur that fits snugly within the jaws of your lathe chuck.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eMount the spur:\u003c\/b\u003e Place the spur into the chuck jaws and tighten the chuck firmly.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eCenter the workpiece:\u003c\/b\u003e Align the tip of the spur with the center of your workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eEngage the tailstock:\u003c\/b\u003e Carefully slide the tailstock live center into contact with the center of the other end of your project, applying gentle pressure to secure the workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eStart turning:\u003c\/b\u003e Once the workpiece is securely held, begin turning on the lathe at a suitable speed.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003c\/h4\u003e\n\u003ch4 style=\"text-align: center;\"\u003eImportant points to remember:\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eDrilling a pilot hole:\u003c\/b\u003e\u003cbr\u003eFor better stability, you may need to drill a small pilot hole in the center of your workpiece to accommodate the chuck spur.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSafety first:\u003c\/b\u003e\u003cbr\u003eAlways ensure the chuck is properly tightened and the tailstock is aligned correctly before starting the lathe.\u003c\/p\u003e\n\u003ch5 style=\"text-align: center;\"\u003e\u003c\/h5\u003e\n\u003ch5 style=\"text-align: center;\"\u003eLooking for a different size or taper? We likely carry it! Check out the links below.\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eRGWOOD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eChuck Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-chuck-drive-spur-with-spring-center\/\"\u003eRGWOOD 1″ Multipoint Chuck Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-chuck-drive-spur-with-spring-center\/\"\u003eRGWOOD 5\/8″ Multipoint Chuck Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e1MT Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-drive-spur-with-spring-center-2mt\/\"\u003eRGWOOD 1MT 1″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-woodlathe-drive-drive-spur-1mt-copy\/\"\u003eRGWOOD 1MT Drive Spur\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e2MT Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-drive-spur-with-spring-center-2mt\/\"\u003eRGWOOD 2MT 1″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-2mt-5-8-inch-multipoint-drive-spur-with-spring-center\/\"\u003eRGWOOD 2MT 5\/8″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eNOVA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eNOVA NCSC Chuck Spur Centre\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9021-1-1-4%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9021 1-1\/4″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9019-1-2%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9019 1\/2″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9020-7-8%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9020 7\/8″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877128601663,"sku":"RGW-F6101","price":24.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-F6101_multipoint_chuck_drive_spur_spring_center_1_inch_1.webp?v=1792620587"},{"product_id":"rgwood-2mt-5-8-inch-multipoint-drive-spur-with-spring-center","title":"RGWOOD 2MT 5\/8″ Multipoint Drive Spur with Spring Center","description":"\u003ch1 style=\"text-align: center;\"\u003e\u003cstrong\u003eRGWOOD 2MT 5\/8″ Multipoint Drive Spur with Spring Center\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eThis \u003cb\u003eRGWOOD 2MT 5\/8\" Multipoint Drive Spur with Spring Center \u003c\/b\u003ewill mount right into your 2MT lathe spindle for an easy switch to spindle turning. (Need a different taper or size? Scroll down to the links at the bottom of this listing for more options.) The multiple points on these spurs provide superior holding power, while causing minimal marking on the work-piece compared to other spur centers. On the bottom of a chair leg, for example, it leaves only a circle of tiny holes with another small hole in the center. In addition, the spring loaded center makes this chuck spur easy to align and mount.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWhat is a drive spur?\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003eA drive spur, also called a \"drive center,\" is a small, pointed piece that fits right into the spindle of your wood lathe, to securely hold your work-piece in preparation for turning. This is ideal particularly for spindle turning, and works by providing a central point of contact for the tailstock live center to push against. To use a drive spur, simply insert the spur into your lathe spindle, align your project's center with the spur, and then engage the tailstock live center to push against the work-piece and keep it stable while turning.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eKey steps to using a drive spur:\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSelect the right size:\u003c\/b\u003e Choose a drive spur with the correct Morse Taper to fit your lathe spindle. For example, choose a 2MT drive spur to fit a 2MT lathe, or a 1MT drive spur to fit a 1MT lathe. \"Chuck drive spurs\" are also available to mount into a chuck rather than directly into your lathe.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eMount the spur:\u003c\/b\u003e Place the spur into the lathe spindle. As long as you've selected the right size spur for your lathe, friction and the pressure from the tailstock will keep the spur in place while turning.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eCenter the workpiece:\u003c\/b\u003e Align the tip of the spur with the center of your workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eEngage the tailstock:\u003c\/b\u003e Carefully slide the tailstock live center into contact with the center of the other end of your project, applying gentle pressure to secure the workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eStart turning:\u003c\/b\u003e Once the workpiece is securely held, begin turning on the lathe at a suitable speed.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eImportant points to remember:\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eDrilling a pilot hole:\u003c\/b\u003e\u003cbr\u003eFor better stability, you may need to drill a small pilot hole in the center of your workpiece to accommodate the point of the spur.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSafety first:\u003c\/b\u003e\u003cbr\u003eAlways ensure the spur and the tailstock are aligned correctly before starting the lathe.\u003c\/p\u003e\n\u003cp\u003e\u003cimg width=\"1080\" height=\"200\" src=\"https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2022\/12\/RGW-F6102_multi_point_drive_spur_5_8_inch_2MT_3-1.webp\" alt=\"\" decoding=\"async\" loading=\"lazy\" srcset=\"https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2022\/12\/RGW-F6102_multi_point_drive_spur_5_8_inch_2MT_3-1.webp 1080w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2022\/12\/RGW-F6102_multi_point_drive_spur_5_8_inch_2MT_3-1-400x74.webp 400w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2022\/12\/RGW-F6102_multi_point_drive_spur_5_8_inch_2MT_3-1-768x142.webp 768w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2022\/12\/RGW-F6102_multi_point_drive_spur_5_8_inch_2MT_3-1-430x80.webp 430w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2022\/12\/RGW-F6102_multi_point_drive_spur_5_8_inch_2MT_3-1-700x130.webp 700w, https:\/\/woodworkerspecialties.com\/wp-content\/uploads\/2022\/12\/RGW-F6102_multi_point_drive_spur_5_8_inch_2MT_3-1-150x28.webp 150w\" sizes=\"auto, (max-width: 1080px) 100vw, 1080px\"\u003e\u003c\/p\u003e\n\u003ch5 style=\"text-align: center;\"\u003eLooking for a different size or taper? We likely carry it! Check out the links below.\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eRGWOOD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eChuck Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-chuck-drive-spur-with-spring-center\/\"\u003eRGWOOD 1″ Multipoint Chuck Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-chuck-drive-spur-with-spring-center\/\"\u003eRGWOOD 5\/8″ Multipoint Chuck Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e1MT Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-drive-spur-with-spring-center-2mt\/\"\u003eRGWOOD 1MT 1″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-woodlathe-drive-drive-spur-1mt-copy\/\"\u003eRGWOOD 1MT Drive Spur\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e2MT Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-drive-spur-with-spring-center-2mt\/\"\u003eRGWOOD 2MT 1″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-2mt-5-8-inch-multipoint-drive-spur-with-spring-center\/\"\u003eRGWOOD 2MT 5\/8″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eNOVA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eNOVA NCSC Chuck Spur Centre\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9021-1-1-4%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9021 1-1\/4″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9019-1-2%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9019 1\/2″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9020-7-8%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9020 7\/8″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877128634431,"sku":"RGW-F6102","price":24.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-F6102_multi_point_drive_spur_5_8_inch_2MT_1.webp?v=1792620552"},{"product_id":"rgwood-1-multipoint-drive-spur-with-spring-center-2mt","title":"RGWOOD 2MT 1\" Multipoint Drive Spur with Spring Center","description":"\u003ch1 style=\"text-align: center;\"\u003e\u003cstrong\u003eRGWOOD 2MT 1″ Multipoint Drive Spur with Spring Center\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eThis \u003cb\u003eRGWOOD 2MT 1\" Multipoint Drive Spur with Spring Center \u003c\/b\u003ewill mount right into your 2MT lathe spindle for an easy switch to spindle turning. (Need a different taper or size? Scroll down to the links at the bottom of this listing for more options.) The multiple points on these spurs provide superior holding power, while causing minimal marking on the work-piece compared to other spur centers. On the bottom of a chair leg, for example, it leaves only a circle of tiny holes with another small hole in the center. In addition, the spring loaded center makes this chuck spur easy to align and mount.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWhat is a drive spur?\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003eA drive spur, also called a \"drive center,\" is a small, pointed piece that fits right into the spindle of your wood lathe, to securely hold your work-piece in preparation for turning. This is ideal particularly for spindle turning, and works by providing a central point of contact for the tailstock live center to push against. To use a drive spur, simply insert the spur into your lathe spindle, align your project's center with the spur, and then engage the tailstock live center to push against the work-piece and keep it stable while turning.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eKey steps to using a drive spur:\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSelect the right size:\u003c\/b\u003e Choose a drive spur with the correct Morse Taper to fit your lathe spindle. For example, choose a 2MT drive spur to fit a 2MT lathe, or a 1MT drive spur to fit a 1MT lathe. \"Chuck drive spurs\" are also available to mount into a chuck rather than directly into your lathe.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eMount the spur:\u003c\/b\u003e Place the spur into the lathe spindle. As long as you've selected the right size spur for your lathe, friction and the pressure from the tailstock will keep the spur in place while turning.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eCenter the workpiece:\u003c\/b\u003e Align the tip of the spur with the center of your workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eEngage the tailstock:\u003c\/b\u003e Carefully slide the tailstock live center into contact with the center of the other end of your project, applying gentle pressure to secure the workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eStart turning:\u003c\/b\u003e Once the workpiece is securely held, begin turning on the lathe at a suitable speed.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eImportant points to remember:\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eDrilling a pilot hole:\u003c\/b\u003e\u003cbr\u003eFor better stability, you may need to drill a small pilot hole in the center of your workpiece to accommodate the point of the spur.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSafety first:\u003c\/b\u003e\u003cbr\u003eAlways ensure the spur and the tailstock are aligned correctly before starting the lathe.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5 style=\"text-align: center;\"\u003eLooking for a different size or taper? We likely carry it! Check out the links below.\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eRGWOOD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eChuck Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-chuck-drive-spur-with-spring-center\/\"\u003eRGWOOD 1″ Multipoint Chuck Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-chuck-drive-spur-with-spring-center\/\"\u003eRGWOOD 5\/8″ Multipoint Chuck Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e1MT Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-drive-spur-with-spring-center-2mt\/\"\u003eRGWOOD 1MT 1″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-woodlathe-drive-drive-spur-1mt-copy\/\"\u003eRGWOOD 1MT Drive Spur\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e2MT Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-drive-spur-with-spring-center-2mt\/\"\u003eRGWOOD 2MT 1″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-2mt-5-8-inch-multipoint-drive-spur-with-spring-center\/\"\u003eRGWOOD 2MT 5\/8″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eNOVA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eNOVA NCSC Chuck Spur Centre\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9021-1-1-4%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9021 1-1\/4″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9019-1-2%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9019 1\/2″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9020-7-8%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9020 7\/8″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877128667199,"sku":"RGW-F6103","price":24.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-F6103_multi_point_drive_spur_1_inch_2MT_1.webp?v=1792620520"},{"product_id":"rgwood-tailstock-live-center-cup-style-2mt","title":"RGWOOD 2MT Tailstock Live Center, Cup Style","description":"\u003ch1 style=\"text-align: center;\"\u003e\u003cstrong\u003eRGWOOD 2MT Tailstock Live Center, Cup Style\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eThis is an \u003cb\u003eRGWOOD 2MT Tailstock Live Center, Cup Style (Also called Ring Style). \u003c\/b\u003eThis live center is easy to install and will fit right into a 2MT tailstock spindle. Featuring a cylindrical body with a recessed cup or ring at the tip, the cup\/ring style design allows it to securely hold and support the workpiece during turning operations. This shape also provides a larger contact area with the workpiece, enhancing grip while accommodating slight variations in size and shape.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e(Looking for 1MT? \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-tailstock-live-center-cup-style-1mt\/\"\u003eClick HERE\u003c\/a\u003e)\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eWhat is a live centre?\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eA tailstock live center is a rotating support tool used with a wood lathe, specifically attached to the tailstock, which is the non-driving end of the lathe. The live center helps balance and stabilize the workpiece while it rotates.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eInstallation and removal are quick and hassle-free, letting you focus on your creativity rather than setup.\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eThis live center has a pointed tip that rotates with the workpiece, reducing friction and wear compared to stationary or \"dead\" centers.\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eDesigned with ball bearings for seamless rotation, ensuring that you achieve excellent results with minimal effort.\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eIdeal for a wide range of woodworking projects, from turning bowls and pens to crafting intricate designs, making it a must-have for both hobbyists and professional woodworkers.\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eBy providing support at both ends, the live center helps to minimize vibrations, leading to smoother finishes.\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eOffers better control and precision when working on long or delicate pieces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eKey steps to using a live centre:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSelect the right size:\u003c\/b\u003e Choose a live center with the correct Morse Taper to fit your lathe's tailstock spindle. For example, choose a 1MT live centre to fit a 1MT lathe, or a 2MT live centre to fit a 2MT lathe.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eClean the taper: \u003c\/b\u003eIt's always a good idea to give the live centre and the tailstock spindle a quick clean before installing, to remove debris for a more secure fit.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eInstall the live center: \u003c\/b\u003einsert the tapered shank of the live center directly into the 1MT taper in the tailstock spindle, ensuring it is fully seated and secure.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eCenter the workpiece:\u003c\/b\u003e Make sure the live center is aligned with the headstock center. You can check visually or with an alignment tool.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eTighten the tailstock:\u003c\/b\u003e Carefully slide the tailstock live center into contact with the center of the loose end of your project, applying gentle pressure to secure the workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eStart turning:\u003c\/b\u003e Once the workpiece is securely held, begin turning on the lathe at a suitable speed.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSafety first: \u003c\/b\u003eAlways ensure the headstock and the tailstock are aligned correctly before starting the lathe. Always follow the safety guidelines of your lathe.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877128699967,"sku":"RGW-F6105","price":24.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-F6105_tailstock_live_center_cup_style_2MT_1.webp?v=1792620502"},{"product_id":"rgwood-1mt-5-8-multipoint-drive-spur-with-spring-center","title":"RGWOOD 1MT 1\" Multipoint  Drive Spur with Spring Center","description":"\u003ch1 style=\"text-align: center;\"\u003e\u003cstrong\u003eRGWOOD 1MT 1″ Multipoint Drive Spur with Spring Center\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eThis \u003cb\u003eRGWOOD 1MT 1\" Multipoint Drive Spur with Spring Center \u003c\/b\u003ewill mount right into your 1MT lathe spindle for an easy switch to spindle turning. (Need a different taper or size? Scroll down to the links at the bottom of this listing for more options.) The multiple points on these spurs provide superior holding power, while causing minimal marking on the work-piece compared to other spur centers. On the bottom of a chair leg, for example, it leaves only a circle of tiny holes with another small hole in the center. In addition, the spring loaded center makes this chuck spur easy to align and mount.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eWhat is a drive spur?\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003eA drive spur, also called a \"drive center,\" is a small, pointed piece that fits right into the spindle of your wood lathe, to securely hold your work-piece in preparation for turning. This is ideal particularly for spindle turning, and works by providing a central point of contact for the tailstock live center to push against. To use a drive spur, simply insert the spur into your lathe spindle, align your project's center with the spur, and then engage the tailstock live center to push against the work-piece and keep it stable while turning.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eKey steps to using a drive spur:\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSelect the right size:\u003c\/b\u003e Choose a drive spur with the correct Morse Taper to fit your lathe spindle. For example, choose a 1MT drive spur to fit a 1MT lathe, or a 2MT drive spur to fit a 2MT lathe. \"Chuck drive spurs\" are also available to mount into a chuck rather than directly into your lathe.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eMount the spur:\u003c\/b\u003e Place the spur into the lathe spindle. As long as you've selected the right size spur for your lathe, friction and the pressure from the tailstock will keep the spur in place while turning.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eCenter the workpiece:\u003c\/b\u003e Align the tip of the spur with the center of your workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eEngage the tailstock:\u003c\/b\u003e Carefully slide the tailstock live center into contact with the center of the other end of your project, applying gentle pressure to secure the workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eStart turning:\u003c\/b\u003e Once the workpiece is securely held, begin turning on the lathe at a suitable speed.\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eImportant points to remember:\u003c\/h4\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eDrilling a pilot hole:\u003c\/b\u003e\u003cbr\u003eFor better stability, you may need to drill a small pilot hole in the center of your workpiece to accommodate the point of the spur.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSafety first:\u003c\/b\u003e\u003cbr\u003eAlways ensure the spur and the tailstock are aligned correctly before starting the lathe.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5 style=\"text-align: center;\"\u003eLooking for a different size or taper? We likely carry it! Check out the links below.\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eRGWOOD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eChuck Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-chuck-drive-spur-with-spring-center\/\"\u003eRGWOOD 1″ Multipoint Chuck Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-chuck-drive-spur-with-spring-center\/\"\u003eRGWOOD 5\/8″ Multipoint Chuck Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e1MT Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-5-8-multipoint-drive-spur-with-spring-center-2mt\/\"\u003eRGWOOD 1MT 1″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-woodlathe-drive-drive-spur-1mt-copy\/\"\u003eRGWOOD 1MT Drive Spur\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e2MT Drive Spurs\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-1-multipoint-drive-spur-with-spring-center-2mt\/\"\u003eRGWOOD 2MT 1″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-2mt-5-8-inch-multipoint-drive-spur-with-spring-center\/\"\u003eRGWOOD 2MT 5\/8″ Multipoint Drive Spur with Spring Center\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eNOVA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eNOVA NCSC Chuck Spur Centre\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9021-1-1-4%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9021 1-1\/4″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9019-1-2%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9019 1\/2″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/nova-9020-7-8%e2%80%b3-flexible-point-drive-center\/\"\u003eNOVA 9020 7\/8″ Flexible Point Drive Centre\u003c\/a\u003e\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877128732735,"sku":"RGW-F6106","price":24.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-F6106_multipoint_drive_spur_spring_center_1_inch_1MT_1.webp?v=1792620482"},{"product_id":"rgwood-tailstock-live-center-cup-style-1mt","title":"RGWOOD 1MT Tailstock Live Center, Cup Style","description":"\u003ch1 style=\"text-align: center;\"\u003e\u003cstrong\u003eRGWOOD 1MT Tailstock Live Center, Cup Style\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eThis is an \u003cb\u003eRGWOOD 1MT Tailstock Live Center, Cup Style (Also called Ring Style). \u003c\/b\u003eThis live center is easy to install and will fit right into a 1MT tailstock spindle. Featuring a cylindrical body with a recessed cup or ring at the tip, the cup\/ring style design allows it to securely hold and support the workpiece during turning operations. This shape also provides a larger contact area with the workpiece, enhancing grip while accommodating slight variations in size and shape.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e(Looking for 2MT? \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/rgwood-tailstock-live-center-cup-style-2mt\/\"\u003eClick HERE)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eWhat is a live centre?\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eA tailstock live center is a rotating support tool used with a wood lathe, specifically attached to the tailstock, which is the non-driving end of the lathe. The live center helps balance and stabilize the workpiece while it rotates.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eInstallation and removal are quick and hassle-free, letting you focus on your creativity rather than setup.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eThis live center has a pointed tip that rotates with the workpiece, reducing friction and wear compared to stationary or \"dead\" centers.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eDesigned with ball bearings for seamless rotation, ensuring that you achieve excellent results with minimal effort.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eIdeal for a wide range of woodworking projects, from turning bowls and pens to crafting intricate designs, making it a must-have for both hobbyists and professional woodworkers.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eBy providing support at both ends, the live center helps to minimize vibrations, leading to smoother finishes.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eOffers better control and precision when working on long or delicate pieces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eKey steps to using a live centre:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSelect the right size:\u003c\/b\u003e Choose a live center with the correct Morse Taper to fit your lathe's tailstock spindle. For example, choose a 1MT live centre to fit a 1MT lathe, or a 2MT live centre to fit a 2MT lathe.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eClean the taper: \u003c\/b\u003eIt's always a good idea to give the live centre and the tailstock spindle a quick clean before installing, to remove debris for a more secure fit.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eInstall the live center: \u003c\/b\u003einsert the tapered shank of the live center directly into the 1MT taper in the tailstock spindle, ensuring it is fully seated and secure.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eCenter the workpiece:\u003c\/b\u003e Make sure the live center is aligned with the headstock center. You can check visually or with an alignment tool.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eTighten the tailstock:\u003c\/b\u003e Carefully slide the tailstock live center into contact with the center of the loose end of your project, applying gentle pressure to secure the workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eStart turning:\u003c\/b\u003e Once the workpiece is securely held, begin turning on the lathe at a suitable speed.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSafety first: \u003c\/b\u003eAlways ensure the headstock and the tailstock are aligned correctly before starting the lathe. Always follow the safety guidelines of your lathe.\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877128798271,"sku":"RGW-FSTLC1MT","price":24.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-FSTLC1MT_tailstock_live_center_cup_style_1MT_1.webp?v=1792620384"},{"product_id":"32mm-spanner-wrench-for-maxwood-rgwood-3-face-plates","title":"32mm spanner wrench for MAXWOOD \u0026 RGWOOD 3\" face plates","description":"\u003cp\u003eRGW-FWM32. 32mm thin flat spanner wrench for MAXWOOD \u0026amp; RGWOOD 1\" x8TPI \u0026amp; 3\/4\"x16TPI 3\" face plates.\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877128831039,"sku":"RGW-FWM32","price":9.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-FWM32_spanner_wrench_32mm_2.webp?v=1792620217"},{"product_id":"42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates","title":"42mm spanner wrench for RGWOOD \u0026 MAXWOOD 4\" face plates","description":"\u003cp\u003eRGW-FWM42. 42mm thin flat spanner wrench for RGWOOD and MAXWOOD 4\" face plates.\u003cbr\u003e\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877128863807,"sku":"RGW-FWM42","price":9.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5147_1.webp?v=1792620294"},{"product_id":"mw-5146-46mm-thin-flat-spanner-wrench-for-maxwood-6-face-plates","title":"46mm thin flat spanner wrench for RGWOOD \u0026 MAXWOOD 6\" face plates","description":"\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eRGW-FWM46. 46MM thin flat spanner wrench for RGWOOD and MAXWOOD 6\" face plates.\u003c\/span\u003e\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877128896575,"sku":"RGW-FWM46","price":9.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5146_1.webp?v=1792620019"},{"product_id":"rgwood-2mt-tailstock-3-4-spur-live-center","title":"RGWOOD 2MT 3\/4\" Multi Point Tailstock Live Center","description":"\u003ch1 style=\"text-align: center;\"\u003eRGWOOD 2MT 3\/4\" Multi Point Tailstock Live Center\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eThis is an \u003cstrong\u003eRGWOOD 2MT 3\/4\" Multi Point Tailstock Live Center\u003c\/strong\u003e\u003cb\u003e. \u003c\/b\u003eThis live center is easy to install and will fit right into a 2MT tailstock spindle. Featuring a multipoint surface and spring loaded pin, this live center offers strong workholding, and won't split your wood. This shape also provides a larger contact area with the workpiece, enhancing grip while accommodating slight variations in size and shape.\u003c\/p\u003e\n\u003ch4 style=\"text-align: left;\"\u003eWhat is a live centre?\u003c\/h4\u003e\n\u003cp style=\"text-align: left;\"\u003eA tailstock live center is a rotating support tool used with a wood lathe, specifically attached to the tailstock, which is the non-driving end of the lathe. The live center helps balance and stabilize the workpiece while it rotates.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003eInstallation and removal are quick and hassle-free, letting you focus on your creativity rather than setup.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eThis live center has a pointed tip that rotates with the workpiece, reducing friction and wear compared to stationary or \"dead\" centers.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eDesigned with ball bearings for seamless rotation, ensuring that you achieve excellent results with minimal effort.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eIdeal for a wide range of woodworking projects, from turning bowls and pens to crafting intricate designs, making it a must-have for both hobbyists and professional woodworkers.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eBy providing support at both ends, the live center helps to minimize vibrations, leading to smoother finishes.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eOffers better control and precision when working on long or delicate pieces.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003c\/h3\u003e\n\u003ch3 style=\"text-align: center;\"\u003eKey steps to using a live centre:\u003c\/h3\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSelect the right size:\u003c\/b\u003e Choose a live center with the correct Morse Taper to fit your lathe's tailstock spindle. For example, choose a 1MT live centre to fit a 1MT lathe, or a 2MT live centre to fit a 2MT lathe.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eClean the taper: \u003c\/b\u003eIt's always a good idea to give the live centre and the tailstock spindle a quick clean before installing, to remove debris for a more secure fit.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eInstall the live center: \u003c\/b\u003einsert the tapered shank of the live center directly into the 2MT taper in the tailstock spindle, ensuring it is fully seated and secure.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eCenter the workpiece:\u003c\/b\u003e Make sure the live center is aligned with the headstock center. You can check visually or with an alignment tool.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eTighten the tailstock:\u003c\/b\u003e Carefully slide the tailstock live center into contact with the center of the loose end of your project, applying gentle pressure to secure the workpiece.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eStart turning:\u003c\/b\u003e Once the workpiece is securely held, begin turning on the lathe at a suitable speed.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eSafety first: \u003c\/b\u003eAlways ensure the headstock and the tailstock are aligned correctly before starting the lathe. Always follow the safety guidelines of your lathe.\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129355327,"sku":"RGW-LCMP34","price":39.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-LCMP34_multi_point_live_center_2MT_3.webp?v=1792631163"},{"product_id":"rgwood-4-inch-wood-lathe-faceplate-1-x-8tpi","title":"RGWOOD 4\" Wood Lathe Faceplate (1” x 8tpi)","description":"\u003ch1\u003eRGWOOD 4\" Wood Lathe Faceplate (1” x 8tpi)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 4\" Wood Lathe Faceplate (1” x 8tpi) with locking set screw for reverse turning. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 4\" Wood Lathe Faceplate for 1\" x 8tpi spindles features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne heavy duty \u003cstrong\u003e4\" faceplate\u003c\/strong\u003e to fit\u003cstrong\u003e 1” x 8tpi \u003c\/strong\u003elathe spindles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLocking set screw for reverse turning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e12 holes \u003c\/strong\u003efor multiple fastening options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFlats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129388095,"sku":"RGW-M5106","price":27.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5106_4_inch_faceplate_1x8tpi_1.webp?v=1792193372"},{"product_id":"rgwood-4-inch-wood-lathe-faceplate-double-threaded-1-inch-x-8tpi","title":"RGWOOD 4\" Wood Lathe Faceplate (Double Threaded 1\" x 8tpi)","description":"\u003ch1\u003eRGWOOD 4\" Wood Lathe Faceplate (Double Threaded 1\" x 8tpi)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 4\" Wood Lathe Faceplate (Double Threaded 1\" x 8tpi) with RH\/LH thread (fits 1\" x 8tpi LH outboard spindles as well), and \u003cstrong\u003elocking set screw \u003c\/strong\u003efor reverse turning. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 4\" Wood Lathe Faceplate for 1\" x 8tpi spindles features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne \u003cstrong\u003edouble threaded\u003c\/strong\u003e \u003cstrong\u003e4\" faceplate\u003c\/strong\u003e to fit\u003cstrong\u003e 1” x 8tpi \u003c\/strong\u003elathe spindles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRH\/LH thread\u003c\/strong\u003e (fits 1\" x 8tpi LH outboard spindles as well)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e12 holes \u003c\/strong\u003efor multiple fastening options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eLocking set screw on faceplate to lock to spindle for reverse turning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFlats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003c\/h3\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129420863,"sku":"RGW-M5106DT","price":31.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5106DT_4_inch_faceplate_double_threaded_1x8tpi_1.webp?v=1792193404"},{"product_id":"rgwood-4-inch-wood-lathe-faceplate-1-1-4-x-8tpi","title":"RGWOOD 4\" Wood Lathe Faceplate (1-1\/4\" x 8tpi)","description":"\u003ch1\u003eRGWOOD 4\" Wood Lathe Faceplate (1-1\/4\" x 8tpi)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 4\" Wood Lathe Faceplate (1-1\/4\" x 8tpi) with \u003cstrong\u003elocking set screw \u003c\/strong\u003efor reverse turning. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 4\" Wood Lathe Faceplate for 1-1\/4\" x 8tpi spindles features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne \u003cstrong\u003e4\" faceplate\u003c\/strong\u003e to fit\u003cstrong\u003e 1-1\/4” x 8tpi \u003c\/strong\u003elathe spindles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e12 holes \u003c\/strong\u003efor multiple fastening options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eLocking set screw on faceplate to lock to spindle for reverse turning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFlats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129453631,"sku":"RGW-M5107","price":24.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5107_4_inch_faceplate_1.25x8tpi_1.webp?v=1792193342"},{"product_id":"rgwood-4-wood-lathe-faceplate-m33-x-3-5","title":"RGWOOD 4\" Wood Lathe Faceplate (M33 x 3.5)","description":"\u003ch1 class=\"p1\"\u003eRGWOOD 4\" Wood Lathe Faceplate (M33 x 3.5)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 4\" Wood Lathe Faceplate (\u003cstrong\u003eM33 x 3.5\u003c\/strong\u003e) with \u003cstrong\u003elocking set screw \u003c\/strong\u003efor reverse turning. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 4\" M33 x 3.5 Wood Lathe Faceplate features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne heavy duty \u003cstrong\u003e4\" faceplate, M33 x 3.5\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e8 holes \u003c\/strong\u003efor multiple fastening options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eLocking set screw on faceplate to lock to spindle for reverse turning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e42mm flats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003c\/h3\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129486399,"sku":"RGW-M510M33X4","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M510M33X4_8.webp?v=1792193314"},{"product_id":"rgwood-6-wood-lathe-faceplate-m33-x-3-5","title":"RGWOOD 6\" Wood Lathe Faceplate (M33 x 3.5)","description":"\u003ch1 class=\"p1\"\u003eRGWOOD 6\" Wood Lathe Faceplate (M33 x 3.5)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 6\" Wood Lathe Faceplate (\u003cstrong\u003eM33 x 3.5\u003c\/strong\u003e) with \u003cb\u003etwo\u003c\/b\u003e \u003cstrong\u003elocking set screws \u003c\/strong\u003efor reverse turning. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 6\" M33 x 3.5 Wood Lathe Faceplate features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne heavy duty \u003cstrong\u003e6\" faceplate, M33 x 3.5\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits Oneway\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e8 holes \u003c\/strong\u003efor multiple fastening options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e2 locking set screws on faceplate to lock to spindle for reverse turning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e46mm flats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/mw-5146-46mm-thin-flat-spanner-wrench-for-maxwood-6-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129519167,"sku":"RGW-M510M33X6","price":47.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M510M33X6_7.webp?v=1792193047"},{"product_id":"rgwood-4-inch-wood-lathe-face-plate-5-8-x-plainbore","title":"RGWOOD 4\" Wood Lathe Faceplate (5\/8” x Plainbore)","description":"\u003ch1\u003eRGWOOD 4\" Wood Lathe Faceplate (5\/8” x Plainbore)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 4\" Wood Lathe Faceplate (5\/8\" x Plainbore) with locking set screw, for shopsmith machines. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 4\" Wood Lathe Faceplate, 5\/8\" x Plainbore features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne heavy duty \u003cstrong\u003e4\" faceplate\u003c\/strong\u003e, \u003cstrong\u003e5\/8” x Plainbore \u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor shopsmith machines\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e8 holes \u003c\/strong\u003efor multiple fastening options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eLocking set screw on faceplate to lock to spindle for reverse turning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFlats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129551935,"sku":"RGW-M510S","price":29.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M510S_1.webp?v=1792192943"},{"product_id":"rgwood-4-inch-wood-lathe-face-plate-7-8-x-14tpi","title":"RGWOOD 4\" Wood Lathe Faceplate (7\/8” x 14tpi)","description":"\u003ch1\u003eRGWOOD 4\" Wood Lathe Faceplate (7\/8” x 14tpi)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 4\" Wood Lathe Faceplate (7\/8\" x 14tpi), fits Beaver Rockwell lathes, etc. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 4\" Wood Lathe Faceplate for 7\/8\" x 14tpi spindles features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne \u003cstrong\u003e4\" faceplate\u003c\/strong\u003e to fit\u003cstrong\u003e 7\/8” x 14tpi \u003c\/strong\u003elathe spindles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eBeaver Rockwell lathes\u003c\/strong\u003e, etc\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e8 holes \u003c\/strong\u003efor multiple fastening options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFlats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129584703,"sku":"RGW-M510V","price":28.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M510V_5.webp?v=1792192877"},{"product_id":"rgwood-6-inch-wood-lathe-faceplate-1-x-8tpi","title":"RGWOOD 6\" Wood Lathe Faceplate (1\" x 8tpi)","description":"\u003ch1\u003eRGWOOD 6\" Wood Lathe Faceplate (1\" x 8tpi)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD\u003cstrong\u003e 6\"\u003c\/strong\u003e Wood Lathe Faceplate (\u003cstrong\u003e1\" x 8tpi\u003c\/strong\u003e) with \u003cstrong\u003elocking set screw \u003c\/strong\u003efor reverse turning. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 6\" Wood Lathe Faceplate for 1\" x 8tpi spindles features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne 6\u003cstrong\u003e\" faceplate \u003c\/strong\u003eto fit\u003cstrong\u003e 1” x 8tpi \u003c\/strong\u003elathe spindles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e12 holes \u003c\/strong\u003efor multiple fastening options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eLocking set screw on faceplate to lock to spindle for reverse turning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e46mm flats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/mw-5146-46mm-thin-flat-spanner-wrench-for-maxwood-6-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129617471,"sku":"RGW-M5113","price":42.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5113_6_inch_faceplate_1x8tpi_7.webp?v=1792192772"},{"product_id":"rgwood-6-inch-wood-lathe-faceplate-1-1-4-x-8tpi","title":"RGWOOD 6\" Wood Lathe Faceplate (1-1\/4\" x 8tpi)","description":"\u003ch1 class=\"p1\"\u003eRGWOOD 6\" Wood Lathe Faceplate (1-1\/4\" x 8tpi)\u003c\/h1\u003e\n\u003cp\u003e\u003cb\u003eRGWOOD 6\u003c\/b\u003e\u003cstrong\u003e\"\u003c\/strong\u003e Wood Lathe Faceplate (\u003cstrong\u003e1-1\/4\" x 8tpi\u003c\/strong\u003e) with\u003cb\u003e \u003c\/b\u003e\u003cstrong\u003elocking set screw \u003c\/strong\u003efor reverse turning. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 6\" Wood Lathe Faceplate for 1-1\/4\" x 8tpi spindles features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne \u003cstrong\u003e6\u003c\/strong\u003e\u003cstrong\u003e\" faceplate \u003c\/strong\u003eto fit\u003cstrong\u003e 1-1\/4” x 8tpi \u003c\/strong\u003elathe spindles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e12 holes \u003c\/strong\u003efor multiple fastening options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eLocking set screw on faceplate to lock to spindle for reverse turning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e46mm flats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/mw-5146-46mm-thin-flat-spanner-wrench-for-maxwood-6-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129650239,"sku":"RGW-M5114","price":42.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5114_6_inch_faceplate_1.25x8tpi_1.webp?v=1792192733"},{"product_id":"rgwood-inch-6-wood-lathe-faceplate-double-threaded-1-1-4-x-8tpi","title":"RGWOOD 6\" Wood Lathe Faceplate (Double Threaded 1-1\/4\" x 8tpi)","description":"\u003ch1 class=\"p1\"\u003eRGWOOD 6\" Wood Lathe Faceplate (Double Threaded 1-1\/4\" x 8tpi)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 6\" Wood Lathe Faceplate (Double Threaded 1-1\/4\" x 8tpi) with \u003cb\u003etwo\u003c\/b\u003e \u003cstrong\u003elocking set screws \u003c\/strong\u003efor reverse turning. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 6\" Double Threaded Wood Lathe Faceplate for 1-1\/4\" x 8tpi spindles features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne \u003cstrong\u003e6\" faceplate \u003c\/strong\u003eto fit\u003cstrong\u003e 1-1\/4” x 8tpi \u003c\/strong\u003elathe spindles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDouble threaded RH and LH thread, allowing for outboard turning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e12 holes \u003c\/strong\u003efor multiple fastening options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e2 locking set screws on faceplate to lock to spindle for reverse turning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e46mm flats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/mw-5146-46mm-thin-flat-spanner-wrench-for-maxwood-6-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129683007,"sku":"RGW-M5114DT","price":54.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5114DT_6_inch_faceplate_double_threaded_1-14x8tpi_1.webp?v=1792192683"},{"product_id":"rgwood-8-wood-lathe-faceplate-extra-depth-1-1-4-x-8tpi","title":"RGWOOD 8\" Wood Lathe Faceplate (Extra Depth 1-1\/4\" x 8tpi)","description":"\u003ch1 class=\"p1\"\u003eRGWOOD 8\" Wood Lathe Faceplate (Extra Depth 1-1\/4\" x 8tpi)\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eIn addition to extra depth, \u003c\/strong\u003ethis RGWOOD 8\" Wood Lathe Faceplate (Extra Depth 1-1\/4\" x 8tpi) also features\u003cb\u003e two\u003c\/b\u003e \u003cstrong\u003elocking set screws \u003c\/strong\u003efor reverse turning. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 8\" Wood Lathe Faceplate for 1-1\/4\" x 8tpi spindles features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne \u003cstrong\u003e8\" faceplate \u003c\/strong\u003efor LARGE projects, to fit\u003cstrong\u003e 1-1\/4” x 8tpi \u003c\/strong\u003elathe spindles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"s1\"\u003eExtra depth allows use on larger Laguna and Powermatic lathes without a spacer\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRH thread\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e16 holes \u003c\/strong\u003efor multiple fastening options\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e2 locking set screws on faceplate to lock to spindle for reverse turning\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e46mm flats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/mw-5146-46mm-thin-flat-spanner-wrench-for-maxwood-6-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129715775,"sku":"RGW-M5131","price":109.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5131_1.webp?v=1792192615"},{"product_id":"rgwood-2-inch-wood-lathe-faceplate-3-4-x-16tpi","title":"RGWOOD 2\" Wood Lathe Faceplate (3\/4\" x 16tpi)","description":"\u003ch1\u003e\u003cstrong\u003eRGWOOD 2” Wood Lathe Faceplate (3\/4” x 16tpi)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 2\" Wood Lathe Faceplate (3\/4\" x 16tpi).\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis RGWOOD 2\" wood lathe faceplate features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eone heavy duty 2” faceplate to fit 3\/4\" x 16tpi spindles\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e4 holes for strong fastening\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel\u003c\/li\u003e\n\u003cli\u003e3mm hole in the side of the faceplate - insert hex key, small rod, or nail, to remove faceplate from lathe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129748543,"sku":"RGW-M5134","price":21.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5134_8.webp?v=1792192449"},{"product_id":"rgwood-2-inch-wood-lathe-faceplate-1-x-8tpi","title":"RGWOOD 2” Wood Lathe Faceplate (1” x 8tpi)","description":"\u003ch1\u003e\u003cstrong\u003eRGWOOD 2” Wood Lathe Faceplate (1” x 8tpi)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 2\" Wood Lathe Faceplate (1\" x 8tpi).\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis RGWOOD 2\" wood lathe faceplate features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eone heavy duty 2” faceplate to fit 1” x 8tpi spindles\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e4 holes for strong fastening\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel\u003c\/li\u003e\n\u003cli\u003e3mm hole in the side of the faceplate - insert hex key, small rod, or nail, to remove faceplate from lathe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129781311,"sku":"RGW-M5135","price":21.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5135_2_inch_faceplate_1x8tpi_1.webp?v=1792192335"},{"product_id":"rgwood-3-inch-wood-lathe-faceplate-3-4-x-16tpi","title":"RGWOOD 3\" Wood Lathe Faceplate (3\/4” x 16tpi)","description":"\u003ch1\u003eRGWOOD 3\" Wood Lathe Faceplate (3\/4” x 16tpi)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 3\" Wood Lathe Faceplate (3\/4” x 16tpi)\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 3\" Wood Lathe Faceplate for 3\/4\" x 16tpi spindles features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne heavy duty \u003cstrong\u003e3\" faceplate\u003c\/strong\u003e to fit\u003cstrong\u003e 3\/4” x 16tpi \u003c\/strong\u003elathe spindles\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e8 holes \u003c\/strong\u003efor multiple fastening options\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFlats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread. \u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured. \u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square. \u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold. \u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy. \u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask. \u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws. \u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use. \u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects. \u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877129814079,"sku":"RGW-M5136","price":23.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5136_3_inch_faceplate_0.75x16tpi_2.webp?v=1792192306"},{"product_id":"rgwood-3-inch-wood-lathe-faceplate-1-x-8tpi","title":"RGWOOD 3\" Wood Lathe Faceplate (1” x 8tpi)","description":"\u003ch1\u003eRGWOOD 3\" Wood Lathe Faceplate (1” x 8tpi)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 3\" Wood Lathe Faceplate (1” x 8tpi)\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 3\" Wood Lathe Faceplate for 1\" x 8tpi spindles features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne heavy duty \u003cstrong\u003e3\" faceplate\u003c\/strong\u003e to fit\u003cstrong\u003e 1” x 8tpi \u003c\/strong\u003elathe spindles\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e8 holes \u003c\/strong\u003efor multiple fastening options\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFlats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread.\u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured.\u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square.\u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold.\u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy.\u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask.\u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws.\u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use.\u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects.\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877130108991,"sku":"RGW-M5137","price":23.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-5137_3_inch_faceplate_1x8tpi_1.webp?v=1792192261"},{"product_id":"rgwood-4-inch-wood-lathe-faceplate-3-4-x-16tpi","title":"RGWOOD 4\" Wood Lathe Faceplate (3\/4” x 16tpi)","description":"\u003ch1\u003eRGWOOD 4\" Wood Lathe Faceplate (3\/4” x 16tpi)\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 4\" Wood Lathe Faceplate (3\/4” x 16tpi)\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis 4\" Wood Lathe Faceplate for 3\/4\" x 16tpi spindles features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eOne heavy duty \u003cstrong\u003e4\" faceplate\u003c\/strong\u003e to fit\u003cstrong\u003e 3\/4” x 16tpi \u003c\/strong\u003elathe spindles\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e\n\u003cstrong\u003e8 holes \u003c\/strong\u003efor multiple fastening options\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFlats on the back of the faceplate compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates\/\"\u003espanner wrench\u003c\/a\u003e for easy removal from lathe (must purchase wrench separately)\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel, at 7\/16\" thick.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new faceplate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread.\u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured.\u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square.\u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold.\u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy.\u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask.\u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws.\u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use.\u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects.\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877130141759,"sku":"RGW-M5138","price":25.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-M5138_1.webp?v=1792192226"},{"product_id":"rgwood-3-inch-wood-lathe-faceplate-1-1-4-x-8tpi","title":"RGWOOD 3\" Wood Lathe Faceplate (1-1\/4\" x 8tpi)","description":"\u003ch1\u003e\u003cstrong\u003eRGWOOD 3” Wood Lathe Faceplate (1-1\/4” x 8tpi)\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eRGWOOD 3\" Wood Lathe Faceplate (1-1\/4\" x 8tpi) with a \u003cstrong\u003elocking set screw\u003c\/strong\u003e for reverse turning.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThis RGWOOD 3\" wood lathe faceplate features:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eone heavy duty 3” faceplate to fit 1-1\/4” x 8tpi spindles\u003c\/li\u003e\n\u003cli\u003eA locking set screw on the faceplate for reverse turning\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e8 holes for multiple fastening options\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFaceplate is made of heavy duty steel\u003c\/li\u003e\n\u003cli\u003eFlats on the back are compatible with this \u003ca href=\"https:\/\/woodworkerspecialties.com\/product\/42mm-spanner-wrench-for-rgwood-maxwood-4-face-plates\/\"\u003ewrench\u003c\/a\u003e for easy removal from lathe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDid you know we also sell faceplate bundles? \u003ca href=\"https:\/\/woodworkerspecialties.com\/?s=faceplate+bundle\u0026amp;post_type=product\"\u003eCheck this out!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 12pt;\"\u003eIf you’re new to wood turning, here are some useful tips to help you get set up with your new 3\" wood lathe face plate:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e1. Preparation: Ensure the lathe is off. Select the correct faceplate size that matches your lathe’s spindle thread.\u003c\/p\u003e\n\u003cp\u003e2. Mounting: Screw the faceplate onto the lathe spindle clockwise, ensuring it's tightly secured.\u003c\/p\u003e\n\u003cp\u003e3. Wood Preparation: Choose a suitable piece of wood, cut it to rough dimensions if needed, and ensure one face is flat and square.\u003c\/p\u003e\n\u003cp\u003e4. Attachment: Place the wood against the faceplate and use screws to secure it evenly around the perimeter. This ensures a stable hold.\u003c\/p\u003e\n\u003cp\u003e5. Balance and Centering: Rotate the spindle manually to check for balance and adjust the wood or faceplate position as necessary. Use centering tools for accuracy.\u003c\/p\u003e\n\u003cp\u003e6. Turning: Start the lathe at a low speed and gradually increase. Shape the wood using appropriate turning tools while wearing safety gear like goggles and a dust mask.\u003c\/p\u003e\n\u003cp\u003e7. Finishing: Complete your turning project, periodically checking stability. Turn off the lathe and remove the wood by unscrewing the faceplate screws.\u003c\/p\u003e\n\u003cp\u003e8. Maintenance: Clean and store the faceplate in a dry place after use.\u003c\/p\u003e\n\u003cp\u003eFollowing these steps ensures safe and effective use of your wood lathe faceplate for turning wood projects.\u003c\/p\u003e","brand":"RGWOOD","offers":[{"title":"Default Title","offer_id":43877130436671,"sku":"RGW-MFP31148","price":21.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/files\/RGW-MFP31148_3_inch_faceplate_6.webp?v=1792188250"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/9246\/1375\/collections\/8f1482bb-RGW-AGW58-2.jpg?v=1792091216","url":"https:\/\/woodworkerspecialties.com\/collections\/lathe-accessories.oembed?page=2","provider":"Woodworker Specialties","version":"1.0","type":"link"}